DScan resume timer “St”
The scan resume timer can be selected as a pause (OFF) or timer scan (ON). When OFF is selected, the scan pauses until a received signal disappears. When ON is selected, the scan pauses for 5 sec. after receiving a signal and then re- sumes even if the signal is still being received.
Scan timer OFF (default)
DAuto scan function “AS”
While in standby, this function automatically starts the desired scan (normal or priority scan) 30 sec. after operation.
•Scan indicator blinks while scanning.
Auto scan OFF (default)
SET MODE 6
DMonitor action selection “Sq”
The monitor function cuts off the squelch function temporarily. This selection contains PUSH or HOLD settings as shown below.
•PUSH (Pu): After pushing the [SQL•MONI] for 1 sec., the squelch function is cut off until [SQL•MONI] is released. (default)
•HOLD (Ho): After pushing the [SQL•MONI] for 1 sec., the squelch function is cut off continuously until another key is pushed.
Monitor switch PUSH (default)
DAutomatic backlighting “bL”
This function is convenient for nighttime operation. The auto- matic backlighting turns the backlighting ON when pushing any key except for [PTT].
•The backlighting is automatically turned OFF after 5 sec. of inactivity.
Automatic backlighting ON (default)
14