■Setting tag channels
For more efficient scanning, add desired channels as tag channels or clear tag channels for unwanted channels. Chan- nels set as
qSelect the desired channel group (INT, USA) by pushing [DIAL] for 1 sec., if desired.
wSelect the desired channel to set as a tag channel.
ePush [SCN•TAG] for 1 sec. to set the displayed channel as a tag channel.
-“TAG” appears in the function display.
rTo cancel the tag channel setting, push [SCN•TAG] for 1 sec.
-“TAG” disappears.
SCAN OPERATION 5
■Starting a scan
Set scan type and scan resume timer in advance using SET mode. (pgs. 13, 14)
qSelect the desired channel group (INT, USA) by pushing [DIAL] for 1 sec., if desired.
wPush [SCN•TAG] to start priority or normal scan.
-“SCAN” blinks in the function display.
-“16” appears during priority scan.
-When a signal is detected, scan pauses until the signal disap- pears or resumes after pausing 5 sec. according to SET mode setting. (Channel 16 is still monitored during priority scan.)
-Push [Y]/[Z] to check tag channels, to change the scanning di- rection or resume the scan manually.
eTo stop the scan, push [SCN•TAG].
-“SCAN” disappears.
-Pushing [PTT], [16•C], [DIAL] or [DW•TRI] also stops the scan.
•Clearing all tag channels in the selected channel group While pushing [SCN•TAG], turn the power ON to clear all tag channels in the channel group.
[Example]: Starting a normal scan. | Scan pauses when receiving a | |
signal and audio is emitted. | ||
Scan starts. | ||
Push |
|
Push
TAG
TAG
SCN
SCN
to stop the scan.
12