Figure 2.4a - Inserting C-CARD (II)
NOTE
Throughout this Owner's Manual, the keys are noted in Capital bold letters with quotes, example “ENTER”. Menu operations are in Capital bold letters that are underlined, example: ADVANCED SETUP.
For an example “MENU” + ADVANCED SETUP + “ENTER” + INPUT/OUTPUT
+“ENTER” means:
1.Press the 
key.
2.Use the ShuttlePoint knob 
to select the ADVANCED SETUP menu item.
3.Press the 
key.
4.Use the Shuttlepoint 
to select the INPUT/OUTPUT menu item.
5.Press the 
key.
2.5 CONTROLS AND INDICATORS
NOTE
This section defines each control of the chart plotter. For instructions, refer to Getting Started and Advanced Operation sections of this Owner's Manual.
2.5.0 Controls and Connections
The chart plotter is controlled by using the 10 keys located on the front panel of the CP150C. There is also a ShuttlePoint knob to move the cursor across the screen. As
Page 14 |
| GPS Chart 150C |
|