accurately. It also scrolls the desired option in the menu page(s). It allows to exit from Home mode to Cursor mode. When into menu pages moving it to right selects the desired option, as “ENTER” , moving it to the left exits from menu, as “CLEAR”.
The 
key
Press “ENTER” to select the desired option or to confirm selection.
The 
key
Press “CLEAR” to set Home mode. Also press “CLEAR” to exit from menu or data windows or to leave a menu without making changes, to abort selected function or to step backward from a selection made in the menu.
The 
key
Selects the Main Menu. When in menu mode, moving the ShuttlePoint knob to the right enters a selection, moving the knob to the left clears the function.
If pressing “MENU” for 3 seconds from map display activates Edit mode to choose data to be shown in General, 1 Line Small, 1 Line Large, 2 Lines Small, Highway or Compass windows.
If pressing “MENU” for 3 seconds from Data pages (Navigation, Highway, GPS Status, NMEA Display) allows to customize all data fields shown in the selected page.
The 
key
Allows the user to select a Destination point (Target) at the cursor or a saved Route or Mark.
The 
key
Places Mark under the cursor position (in Home mode Mark is placed under the ship's position).
The 
key
Places Waypoints to make Routes.
The 
key and Lamp/Contrast
Press “PWR” to turn the chart plotter On. Press and hold “PWR” down (once the chart plotter has been turned On) for 3 seconds turns the chart plotter Off.
Press and immediately release “PWR” to adjust light and contrast of the display.
The 
key
Sets MOB (Man OverBoard).
C-CARD slot.
Page 16 |
| GPS Chart 150C |
|