Standard Horizon CP150C owner manual Entering Loran TD’S, Transfer Marks from PC or Other GPS

Page 18

contained in a Route.

2.Press “GOTO” ; you will notice a bearing line from the vessels position and the Target Mark or Waypoint.

Using User Points list:

1.On the Chart page, move the cursor to an open area.

2.Press “GOTO” . A pop-up screen will be shown with selections to go to the CURSOR, ROUTE or MARK.

3.Select the item desired and press “ENTER” (example Mark).

4.The USER POINTS LIST is shown. Move the cursor to highlight the desired Mark and press “GOTO” . You will notice a circle will be placed around the Icon of the selected Mark, this indicates the Goto function is activated for the selected Mark.

5.Press “CLEAR” to revert to the Chart page to navigate to the selected point.

2.14ENTERING LORAN TD’S

The chart plotter must first be put into the TD mode. After all the Marks are entered into the chart plotter, the setting should be set back to “ddd.mm.mmm”, to convert the TD into Latitude/Longitude readings.

1.Press “MENU” and select ADVANCED SETUP + “ENTER” + NAVIGATE + “ENTER” + COORDINATE SYSTEM + “ENTER” + TD, press “ENTER” .

2.Select the Chain and the Pair of the Loran and press “ENTER” .

3.Press “CLEAR” until the Chart page is shown.

4.Press “MARK” to make a Mark at your current location.

5.Press “ENTER” for more options.

6.Select EDIT and press “ENTER” .

7.Press the ShuttlePoint knob to the left until the TD’s are highlighted and press “ENTER” .

8.Move the ShuttlePoint knob up or down to change the numbers, press the left or right position on the ShuttlePoint knob to step to the next number.

9.Press “ENTER” to move to the next line.

10.Repeat step 8 to enter the second line.

11.Press “ENTER” when finished and “CLEAR” to resume normal operation.

NOTE

1.If the TD numbers are quite a bit off, the Pair letters may be backward. Reversing the two letters solves this problem. Example Y&Z, Change to Z&Y.

2.If the position is still off, select ALTER and turn it on.

Press “MENU” + ADVANCED SETUP + “ENTER” + NAVIGATE + “ENTER” +

COORDINATE SYSTEM + “ENTER” + TD + “ENTER” + ALTER.

2.15 TRANSFER MARKS FROM PC OR OTHER GPS

In order to use this feature you must have navigation software that is NMEA compatible.

Page 20		GPS Chart 150C

Image 18

Contents CP150C Table of Contents MOB Function Index FCC Compliance Statement GPS Chart 150C General Information Packing ListOptions BracketInstalling the Chart Plotter Getting StartedInstalling the Antenna Connecting PowerPower On Optional C-MAP NT+ Cartography Inserting the C-CARDControls and Indicators Controls and ConnectionsKeys ShuttlePoint knobKey Key and Lamp/ContrastCard slot Adjusting Cursor Speed GPS Antenna connector Power and I/O connectorTurning Power on and OFF Changing Ship IconsAdjusting the Time Changing the Display PaletteChanging Light and Contrast Entering in a Mark from a Position Navigating to a MarkPress Menu + Advanced Setup + Enter + Navigate + Enter + Entering Loran TD’STransfer Marks from PC or Other GPS Customizing Data Windows on Chart Selecting North UP or Course UPSelecting Data Window layout Customizing Data boxCustomizing Data Windows on ANY Pages Home Mode VS. Cursor ModeCursor Mode Selecting pagesHome Mode Chart Navigation DataHighway CelestialGPS Status VHF Radio DSC LOGNmea Display Pages DisplayData Depth TrendSelection Creating a New Mark Creating and Using MarksMarks Editing a MarkDeleting a Mark Moving a MarkDeleting a Waypoint Creating and Using RoutesCreating a new Route Locating a MarkMoving a Waypoint 1 Deleting WaypointInserting a Waypoint into a Route 2a Moving WaypointEditing a Waypoint 3b Placing Waypoint between two existing onesRoute Report page Information on a Route 4b Edit WaypointUser Points List page Information on Waypoints Menu + User Points List + EnterAllows locating selected point on the Chart Deleting a Route Selecting Route Color Following a RouteReversing a Route Goto FunctionMOB Function Selecting Time and Distance Deleting MOBTrack Plotter Fuctions Selecting a track line colorDisplaying track MaintenanceSaving a track to memory Deleting trackSpecifications Display Resolution 320 x 240 pixels CartographyOperating temperature range 0/+55 degrees Celsius 13.0GPS Receiver Specifications 13.1GPS Antenna SpecificationsRAM Test Technical 3.14.0System TestRAM Menu RAM ClearContrast DIM MenuCartridges BacklightCard Test Card ConnectorSerial Ports Change ParametersNmea Input/Output Setup of Nmea output sentences NMEA2 Rtcm Input Dual Station Operation Master SlaveTerms and Functions 3.15.0User Points Handling functions 15.0 User Points iconsDestination point MarksWaypoints and Routes Route FollowingInformation on User Points User Points ListRoute Report 15.1Track History15.2Input/Output GPS DataInstruments Data Data Window on ChartData Display NMEA-0183 output Autopilot outputNavigation 15.3.1 GPS StatusOther pages About 15.4User Settings15.3.3 3D Highway Display Map CustomizationDisplay Settings Marine SettingsCustomize Map Depth Settings Land Settings Chart SettingsGeneral Setup Map Orientation 15.4.4 FixNavigate Coordinate SystemCompass AlarmsInternal GPS Setup Input / OutputGPS Chart 150C Automatic Info Simulation15.5.0Info Tree and Expanded Info pages Info function Getting Port Info15.5.3Getting Tide Info To display the Tide Graph page press EnterPort Services 15.6Find FunctionPorts Tide stations Searching by listSearching by name WrecksIndex GPS Position Request Call