Standard Horizon CP150C owner manual Technical 3.14.0System Test, RAM Menu, RAM Test, RAM Clear

Page 44

3.14TECHNICAL 3.14.0System Test

If you have connected your chart plotter according to the instructions, and chosen the proper menu selection for your device, and are still having problems with your chart plotter, the extended auto-test should help determine the problem. Make sure the chart plotter is turned Off. While pressing and holding any other key, turn the chart plotter On. A new menu will appear on the display:

Figure 3.14.0 - System Test

Use the ShuttlePoint knob to select the desired test. Choose the test press “ENTER” . To exit from any submenu press “CLEAR” . To exit from the System Test turn Off the chart plotter.

3.14.0.0 RAM Menu

This test verifies the integrity of the memories and if desired during this test all the internal memory can be erased and the default setting restored.

Figure 3.14.0.0 - RAM Menu

RAM Test

To verify the integrity of the RAM. If on the screen the message ERROR appears, the RAM is physically damaged. Contact your Dealer or STANDARD HORIZON.

RAM Clear

To clear internal memory. If the chart plotter exhibits unusual operations, or appears to be malfunctioning, it may be possible to correct the problem by clearing RAM.

Page 46

 

GPS Chart 150C

 

Page 43 Page 45
Image 44
Page 43 Page 45
Contents CP150C Table of Contents MOB Function Index FCC Compliance Statement GPS Chart 150C General Information Packing ListOptions BracketInstalling the Chart Plotter Getting StartedInstalling the Antenna Connecting PowerPower On Optional C-MAP NT+ Cartography Inserting the C-CARDControls and Indicators Controls and ConnectionsKeys ShuttlePoint knobCard slot KeyKey and Lamp/Contrast GPS Antenna connector Power and I/O connector Turning Power on and OFFAdjusting Cursor Speed Changing Ship IconsChanging Light and Contrast Adjusting the TimeChanging the Display Palette Entering in a Mark from a Position Navigating to a MarkTransfer Marks from PC or Other GPS Press Menu + Advanced Setup + Enter + Navigate + Enter +Entering Loran TD’S Customizing Data Windows on Chart Selecting North UP or Course UPCustomizing Data Windows on ANY Selecting Data Window layoutCustomizing Data box Home Mode VS. Cursor Mode Cursor ModePages Selecting pagesHome Mode Chart Navigation DataHighway CelestialGPS Status VHF Radio DSC LOGNmea Display Pages DisplaySelection DataDepth Trend Creating and Using Marks MarksCreating a New Mark Editing a MarkDeleting a Mark Moving a MarkCreating and Using Routes Creating a new RouteDeleting a Waypoint Locating a MarkMoving a Waypoint 1 Deleting WaypointInserting a Waypoint into a Route 2a Moving WaypointEditing a Waypoint 3b Placing Waypoint between two existing onesRoute Report page Information on a Route 4b Edit WaypointUser Points List page Information on Waypoints Menu + User Points List + EnterAllows locating selected point on the Chart Deleting a Route Following a Route Reversing a RouteSelecting Route Color Goto FunctionMOB Function Deleting MOB Track Plotter FuctionsSelecting Time and Distance Selecting a track line colorMaintenance Saving a track to memoryDisplaying track Deleting trackOperating temperature range 0/+55 degrees Celsius SpecificationsDisplay Resolution 320 x 240 pixels Cartography 13.0GPS Receiver Specifications 13.1GPS Antenna SpecificationsTechnical 3.14.0System Test RAM MenuRAM Test RAM ClearDIM Menu CartridgesContrast BacklightCard Connector Serial PortsCard Test Change ParametersNmea Input/Output Setup of Nmea output sentences NMEA2 Rtcm Input Dual Station Operation Master SlaveTerms and Functions 3.15.0User Points Handling functions 15.0 User Points iconsMarks Waypoints and RoutesDestination point Route FollowingInformation on User Points User Points List15.1Track History 15.2Input/OutputRoute Report GPS DataData Window on Chart Data DisplayInstruments Data NMEA-0183 output Autopilot outputNavigation 15.3.1 GPS Status15.4User Settings 15.3.3 3D Highway DisplayOther pages About Map CustomizationCustomize Map Display SettingsMarine Settings Depth Settings Land Settings Chart SettingsGeneral Setup 15.4.4 Fix NavigateMap Orientation Coordinate SystemAlarms Internal GPS SetupCompass Input / OutputGPS Chart 150C 15.5.0Info Tree and Expanded Info pages Automatic InfoSimulation Info function Getting Port Info15.5.3Getting Tide Info To display the Tide Graph page press EnterPorts Port Services15.6Find Function Searching by list Searching by nameTide stations WrecksIndex GPS Position Request Call
Top Page Image Contents