Standard Horizon CP150C owner manual 15.4.4 Fix, Navigate, Map Orientation, Coordinate System

Page 61

NOTE

Due to the cartography contained in the C-MAP NT+ C-CARD there will be multiple charts shown within the same scale range.

Measure DST & BRG: allows measuring the Distance and Bearing between two points.

Ship Icon: select the preferred icon (among 5 choices) to display ship on the Chart page.

Cursor Speed: select the preferred speed among Low, Medium and High for the cursor in the Chart page and in the menu page.

Units of Measure: allows customization of Disatnce, Speed, Depth and Altitude.

3.15.4.4 Fix

Fix Correction: Enables / Disables the correction of the received fix position.

Compute Correction: Corrects fixes from the positioning instrument. By placing the cursor on the ship's real position and selecting this option, the error is calculated and internally memorized for appropriate correction, but not applied.

Correction Offset: Allows entering the correction to the received fix position.

Position Filter: Attenuate the fix position error.

Speed Filter: Attenuate the fix position error.

3.15.4.5 Navigate

Map Datum: Allows selecting any datum reference from the ones available on the chart plotter. The chart plotter allows selecting about 100 different datum. The default Map Datum is WGS84. C-MAP charts are saved in WGS84 datum. The Map Datum selection switches to the selected reference datum applying the datum offsets stored with the charts.

Map Orientation

-North Up: The top of the map is fixed to North.

-Course Up: The top of the map is oriented to the current Course value.

-Track Up: The top of the map is oriented to the current Navigation Leg. Map Orientation Resolution: 5 – 30 degrees defines the maximum variation of

the reference angle after which the map changes its orientation.

Coordinate System

-Ddd mm.mm: Degrees minutes and hundreds of minutes.

-Ddd mm.mmm: Degrees minutes and thousands of minutes.

-Ddd mm.sss: Degrees minutes and seconds.

-TD: TD function allows converting GPS coordinates to Loran-C coordinates and vice versa. Any position can be displayed or entered in TDs. The chart plotter allows choosing one of the (about) 30 Loran-C chains and allows selecting the two TD stations (Slave 1 and Slave 2). A correction to the TD values can be applied by entering the correction offset (ASF1 and ASF2) to the slaves. (ASF=Additional Secondary phase Factor )

-Select Loran Chain

-Select Slave1

GPS Chart 150C

 

Page 63

 

Page 60 Page 62
Image 61
Page 60 Page 62
Contents CP150C Table of Contents MOB Function Index FCC Compliance Statement GPS Chart 150C Packing List General InformationBracket OptionsGetting Started Installing the Chart PlotterConnecting Power Installing the AntennaOptional C-MAP NT+ Cartography Inserting the C-CARD Power OnControls and Connections Controls and IndicatorsShuttlePoint knob KeysKey and Lamp/Contrast KeyCard slot Turning Power on and OFF GPS Antenna connector Power and I/O connectorAdjusting Cursor Speed Changing Ship IconsChanging the Display Palette Adjusting the TimeChanging Light and Contrast Navigating to a Mark Entering in a Mark from a PositionEntering Loran TD’S Press Menu + Advanced Setup + Enter + Navigate + Enter +Transfer Marks from PC or Other GPS Selecting North UP or Course UP Customizing Data Windows on ChartCustomizing Data box Selecting Data Window layoutCustomizing Data Windows on ANY Cursor Mode Home Mode VS. Cursor ModePages Selecting pagesHome Mode Navigation Data ChartCelestial HighwayVHF Radio DSC LOG GPS StatusDisplay Nmea Display PagesDepth Trend DataSelection Marks Creating and Using MarksCreating a New Mark Editing a MarkMoving a Mark Deleting a MarkCreating a new Route Creating and Using RoutesDeleting a Waypoint Locating a Mark1 Deleting Waypoint Moving a Waypoint2a Moving Waypoint Inserting a Waypoint into a Route3b Placing Waypoint between two existing ones Editing a Waypoint4b Edit Waypoint Route Report page Information on a RouteMenu + User Points List + Enter User Points List page Information on WaypointsAllows locating selected point on the Chart Deleting a Route Reversing a Route Following a RouteSelecting Route Color Goto FunctionMOB Function Track Plotter Fuctions Deleting MOBSelecting Time and Distance Selecting a track line colorSaving a track to memory MaintenanceDisplaying track Deleting trackDisplay Resolution 320 x 240 pixels Cartography SpecificationsOperating temperature range 0/+55 degrees Celsius 13.1GPS Antenna Specifications 13.0GPS Receiver SpecificationsRAM Menu Technical 3.14.0System TestRAM Test RAM ClearCartridges DIM MenuContrast BacklightSerial Ports Card ConnectorCard Test Change ParametersNmea Input/Output Setup of Nmea output sentences Dual Station Operation Master Slave NMEA2 Rtcm Input15.0 User Points icons Terms and Functions 3.15.0User Points Handling functionsWaypoints and Routes MarksDestination point Route FollowingUser Points List Information on User Points15.2Input/Output 15.1Track HistoryRoute Report GPS DataData Display Data Window on ChartInstruments Data NMEA-0183 output Autopilot output15.3.1 GPS Status Navigation15.3.3 3D Highway Display 15.4User SettingsOther pages About Map CustomizationMarine Settings Display SettingsCustomize Map Depth Settings Chart Settings Land SettingsGeneral Setup Navigate 15.4.4 FixMap Orientation Coordinate SystemInternal GPS Setup AlarmsCompass Input / OutputGPS Chart 150C Simulation Automatic Info15.5.0Info Tree and Expanded Info pages Getting Port Info Info functionTo display the Tide Graph page press Enter 15.5.3Getting Tide Info15.6Find Function Port ServicesPorts Searching by name Searching by listTide stations WrecksIndex GPS Position Request Call
Top Page Image Contents