Standard Horizon CP150C Data Display, Instruments Data, NMEA-0183 output Autopilot output

Page 54

Speed Over Ground, Course Over Ground, etc.

3.15.2.1 Instruments Data

The STANDARD HORIZON chart plotters can be connected to other instruments (Depth, Wind, Compass etc) sending NMEA-0183 data or other proprietary data formats.

The chart plotter reads the following NMEA-0183 sentences from the instruments: DBT, DPT, HDG, HDM, HDT, MTW, MWV, VHW, VWR, VWT, RTE, WPL.

Data received from the instruments can be shown on dedicated Data Pages or Trend Graphs (Depth, Wind Speed and Direction graph etc).

Example of SOG graph shown on a dedicated page:

Figure 3.15.2.1 - SOG Graph page

3.15.2.2 NMEA-0183 output (Autopilot output)

STANDARD HORIZON chart plotter can be connected to other instruments (autopi- lots, data repeaters etc). The chart plotter sends the following set of NMEA-0183 sentences: APA, APB, BWC, GGA, GLL, RMA, RMB, RMC, VTG, BOD, WCV, XTE, HDG, HSC. The set of NMEA sentence sent by the chart plotter can be customized (see Input / Output settings).

3.15.3 Data Display

3.15.3.0Data Window on Chart page

(See Sections 2.17 and 2.18).

3.15.3.1GPS Status page

Shows GPS satellites information; Fix status, Time and Date, WASS or DGPS information (Fix Status Icon filed).

Page 56

 

GPS Chart 150C

 

Page 53 Page 55
Image 54
Page 53 Page 55
Contents CP150C Table of Contents MOB Function Index FCC Compliance Statement GPS Chart 150C General Information Packing ListOptions BracketInstalling the Chart Plotter Getting StartedInstalling the Antenna Connecting PowerPower On Optional C-MAP NT+ Cartography Inserting the C-CARDControls and Indicators Controls and ConnectionsKeys ShuttlePoint knobKey Key and Lamp/ContrastCard slot Adjusting Cursor Speed GPS Antenna connector Power and I/O connectorTurning Power on and OFF Changing Ship IconsAdjusting the Time Changing the Display PaletteChanging Light and Contrast Entering in a Mark from a Position Navigating to a MarkPress Menu + Advanced Setup + Enter + Navigate + Enter + Entering Loran TD’STransfer Marks from PC or Other GPS Customizing Data Windows on Chart Selecting North UP or Course UPSelecting Data Window layout Customizing Data boxCustomizing Data Windows on ANY Pages Home Mode VS. Cursor ModeCursor Mode Selecting pagesHome Mode Chart Navigation DataHighway CelestialGPS Status VHF Radio DSC LOGNmea Display Pages DisplayData Depth TrendSelection Creating a New Mark Creating and Using MarksMarks Editing a MarkDeleting a Mark Moving a MarkDeleting a Waypoint Creating and Using RoutesCreating a new Route Locating a MarkMoving a Waypoint 1 Deleting WaypointInserting a Waypoint into a Route 2a Moving WaypointEditing a Waypoint 3b Placing Waypoint between two existing onesRoute Report page Information on a Route 4b Edit WaypointUser Points List page Information on Waypoints Menu + User Points List + EnterAllows locating selected point on the Chart Deleting a Route Selecting Route Color Following a RouteReversing a Route Goto FunctionMOB Function Selecting Time and Distance Deleting MOBTrack Plotter Fuctions Selecting a track line colorDisplaying track MaintenanceSaving a track to memory Deleting trackSpecifications Display Resolution 320 x 240 pixels CartographyOperating temperature range 0/+55 degrees Celsius 13.0GPS Receiver Specifications 13.1GPS Antenna SpecificationsRAM Test Technical 3.14.0System TestRAM Menu RAM ClearContrast DIM MenuCartridges BacklightCard Test Card ConnectorSerial Ports Change ParametersNmea Input/Output Setup of Nmea output sentences NMEA2 Rtcm Input Dual Station Operation Master SlaveTerms and Functions 3.15.0User Points Handling functions 15.0 User Points iconsDestination point MarksWaypoints and Routes Route FollowingInformation on User Points User Points ListRoute Report 15.1Track History15.2Input/Output GPS DataInstruments Data Data Window on ChartData Display NMEA-0183 output Autopilot outputNavigation 15.3.1 GPS StatusOther pages About 15.4User Settings15.3.3 3D Highway Display Map CustomizationDisplay Settings Marine SettingsCustomize Map Depth Settings Land Settings Chart SettingsGeneral Setup Map Orientation 15.4.4 FixNavigate Coordinate SystemCompass AlarmsInternal GPS Setup Input / OutputGPS Chart 150C Automatic Info Simulation15.5.0Info Tree and Expanded Info pages Info function Getting Port Info15.5.3Getting Tide Info To display the Tide Graph page press EnterPort Services 15.6Find FunctionPorts Tide stations Searching by listSearching by name WrecksIndex GPS Position Request Call
Top Page Image Contents