Standard Horizon CP150C owner manual MOB Function

3.7.0.1 Editing a Mark	30
3.7.0.2 Deleting a Mark	31
3.7.0.3 Moving a Mark	31
3.7.0.4 Locating a Mark	32
3.8 CREATING AND USING ROUTES	32
3.8.0 Creating a new Route	32
3.8.1 Deleting a Waypoint	32
3.8.2 Moving a Waypoint	33
3.8.3 Inserting a Waypoint into a Route	34
3.8.4 Editing a Waypoint	35
3.8.5 Route Report page (Information on a Route)	36
3.8.6 User Points List page (Information on Waypoints)	37
3.8.7 Deleting a Route	39
3.8.8 Following a Route	40
3.8.9 Reversing a Route	40
3.8.10 Selecting Route Color	40
3.9 GOTO FUNCTION	40
3.9.0 Goto Cursor	40
3.9.1 Goto Mark On the Chart Screen	41
3.9.2 Goto Mark or Waypoint using the User Point List	41
3.9.3 Goto Route	41
3.9.4 Stopping navigation	41
3.10 MOB FUNCTION	41
3.10.0 Using MOB function	41
3.10.1 Deleting MOB	42
3.11 TRACK PLOTTER FUCTIONS	42
3.11.0 Selecting Time and Distance	42
3.11.1 Selecting a track line color	42
3.11.2 Turning on or off the Track plotter	42
3.11.3 Saving a track to memory	43
3.11.4 Displaying track	43
3.11.5 Deleting track	43
3.12 MAINTENANCE	43
3.13 SPECIFICATIONS	44
3.13.0GPS Receiver Specifications	45
3.13.1GPS Antenna Specifications	45
3.13.1.0Physical Constructions	45
3.13.1.1Cable & Connector	45
3.13.1.2Overall Performance (antenna element, LNA & coax cable)	45
3.13.1.3Enviromental	45
3.14 TECHNICAL	46
3.14.0System Test	46
3.14.0.0RAM Menu	46
3.14.0.1DIM Menu	47
3.14.0.2Cartridges	47
3.14.0.3Serial Ports	48
3.14.1 NMEA Input/Output	49
3.14.1.0 Setup of NMEA output sentences	50
3.14.1.1 NMEA2 RTCM Input	51
3.14.1.2 Dual Station Operation (Master Slave)	51
3.15 TERMS AND FUNCTIONS	52
3.15.0User Points Handling functions	52
3.15.0.0Marks	53

GPS Chart 150C Page 5