Standard Horizon CP150C owner manual Compass, Input / Output, Alarms, Internal GPS Setup

Page 62

-Select Slave2

-Switch Alternate solution

-Set ASF1

-Set ASF2

3.15.4.6Compass

Bearings: Magnetic/True. Allows selection of the reference used in calculating bearings. Switches Magnetic / True bearings display. When Magnetic bearings option is set, the chart plotter applies the selected Magnetic Variation (Auto – Manual) to the True degrees to convert from True to Magnetic bearings.

Variation: Auto – Value. Selects the type of magnetic variation to be applied in the conversion between true and magnetic bearings.

-Auto: allows applying the magnetic variation calculated by the chart plotter or the one received from the GPS (if available).

-Value: allows the user to enter a magnetic variation that will be applied in the conversions.

Calibration: Allows setting the compass deviation (+/- 20 degrees) for the eight compass sector.

Figure 3.16.5.6 - Highway page

3.15.4.7Input / Output

Internal GPS Setup

- Restart GPS: Restarts all GPS processes.

- Operating Mode: Selects Slave or Master Operating Mode.

- Static Navigation: Sets up a threshold for the speed. When the speed received from the positioning device is under that threshold, the chartplotter displays zero.

- Differential Correction Source: None / RTCM / WAAS.

-- None: No correction applied.

-- RTCM 104 Input.

-- WAAS: Correction from WAAS satellite. WAAS (Wide Area Argu- mentation System) is a system at the moment composed by 2 satellites that reduces the fix position error down to +/- 5 meters. The

WAAS satellites Ids are numbered 120 and higher. For all other items see Section 3.14.1.

3.15.4.8 Alarms

Allows setting Arrival, XTE, Depth, Anchor and Grounding alarms.

The chart plotter sounds an acoustic alarm and shows a warning message when any of the above alarms goes off.

Arrival Alarm: Sets and acoustic alarm to sound when the vessel is approaching the destination. The user can select the desired alarm range or disable the alarm.

Page 64		GPS Chart 150C

Image 62

Contents CP150C Table of Contents MOB Function Index FCC Compliance Statement GPS Chart 150C General Information Packing ListOptions BracketInstalling the Chart Plotter Getting StartedInstalling the Antenna Connecting PowerPower On Optional C-MAP NT+ Cartography Inserting the C-CARDControls and Indicators Controls and ConnectionsKeys ShuttlePoint knobCard slot KeyKey and Lamp/Contrast Adjusting Cursor Speed GPS Antenna connector Power and I/O connectorTurning Power on and OFF Changing Ship IconsChanging Light and Contrast Adjusting the TimeChanging the Display Palette Entering in a Mark from a Position Navigating to a MarkTransfer Marks from PC or Other GPS Press Menu + Advanced Setup + Enter + Navigate + Enter +Entering Loran TD’S Customizing Data Windows on Chart Selecting North UP or Course UPCustomizing Data Windows on ANY Selecting Data Window layoutCustomizing Data box Pages Home Mode VS. Cursor ModeCursor Mode Selecting pagesHome Mode Chart Navigation DataHighway CelestialGPS Status VHF Radio DSC LOGNmea Display Pages DisplaySelection DataDepth Trend Creating a New Mark Creating and Using MarksMarks Editing a MarkDeleting a Mark Moving a MarkDeleting a Waypoint Creating and Using RoutesCreating a new Route Locating a MarkMoving a Waypoint 1 Deleting WaypointInserting a Waypoint into a Route 2a Moving WaypointEditing a Waypoint 3b Placing Waypoint between two existing onesRoute Report page Information on a Route 4b Edit WaypointUser Points List page Information on Waypoints Menu + User Points List + EnterAllows locating selected point on the Chart Deleting a Route Selecting Route Color Following a RouteReversing a Route Goto FunctionMOB Function Selecting Time and Distance Deleting MOBTrack Plotter Fuctions Selecting a track line colorDisplaying track MaintenanceSaving a track to memory Deleting trackOperating temperature range 0/+55 degrees Celsius SpecificationsDisplay Resolution 320 x 240 pixels Cartography 13.0GPS Receiver Specifications 13.1GPS Antenna SpecificationsRAM Test Technical 3.14.0System TestRAM Menu RAM ClearContrast DIM MenuCartridges BacklightCard Test Card ConnectorSerial Ports Change ParametersNmea Input/Output Setup of Nmea output sentences NMEA2 Rtcm Input Dual Station Operation Master SlaveTerms and Functions 3.15.0User Points Handling functions 15.0 User Points iconsDestination point MarksWaypoints and Routes Route FollowingInformation on User Points User Points ListRoute Report 15.1Track History15.2Input/Output GPS DataInstruments Data Data Window on ChartData Display NMEA-0183 output Autopilot outputNavigation 15.3.1 GPS StatusOther pages About 15.4User Settings15.3.3 3D Highway Display Map CustomizationCustomize Map Display SettingsMarine Settings Depth Settings Land Settings Chart SettingsGeneral Setup Map Orientation 15.4.4 FixNavigate Coordinate SystemCompass AlarmsInternal GPS Setup Input / OutputGPS Chart 150C 15.5.0Info Tree and Expanded Info pages Automatic InfoSimulation Info function Getting Port Info15.5.3Getting Tide Info To display the Tide Graph page press EnterPorts Port Services15.6Find Function Tide stations Searching by listSearching by name WrecksIndex GPS Position Request Call