Naming Route: Place cursor on Waypoint + “ENTER” + REPORT + “ENTER” + NAME + “ENTER”
Use the ShuttlePoint knob to insert the Route name and press “ENTER” .
Selecting Route Color: Place cursor on Waypoint + “ENTER” + REPORT + “ENTER” + COLOR + “ENTER”
A window with 8 different colors appears, use the ShuttlePoint knob to select the preferred color and press “ENTER” .
Reversing Route: Place cursor on Waypoint + “ENTER” + REPORT + “ENTER” + INVERT + “ENTER”
Reversing a Route plan is most typically used to return to the point where the Route originally started.
Deleting Route: Place cursor on Waypoint + “ENTER” + REPORT + “ENTER” + CLEAR + “ENTER”
A window is opened: select YES and press “ENTER” to confirm (select NO and press “ENTER” otherwise).
Changing Speed & Fuel values: Place cursor on Waypoint + “ENTER” + REPORT + “ENTER” + SPEED/FUEL + “ENTER”
It is possible to modify the Speed and Fuel consumption values, respectively by selecting SPEED and FUEL. Insert value by using the ShuttlePoint knob and pressing “ENTER” .
NOTE
Speed and fuel are made by the user to assist in estimating approximate travel time and fuel consumption for each Route.
3.8.6 User Points List page (Information on Waypoints)
"MENU" + USER POINTS LIST + "ENTER"
Figure 3.8.6 - User Points List page
GPS Chart 150C |
| Page 37 |
|