Intel II manual Installing the Side Cover

Page 35

Installing the Side Cover

CAUTION

When you install the side cover, do not damage the EMI gaskets mounted on the cover. Replace any damaged strips, or your system may not meet EMI requirements.

1.Before replacing a side cover, check that you have not left loose tools or parts inside the system.

2.Check that cables, add-in boards, and other components are properly installed.

3.￿Position the cover over the chassis so that the top row of tabs aligns with slots in the top of the chassis. Slide the cover toward the front of the system until the cover tabs firmly engage in the chassis.

4.Attach the cover to the chassis with the three screws you removed earlier, and tighten them firmly.

5.To prevent unauthorized access inside the system, insert and lock a padlock through the metal loop protruding through the slot in the back of the side cover.

6.￿Connect all external cables and the power cord to the system.

Working Inside the System

35

Image 35
Contents Intel Astor II Server Chassis Subassembly Product Guide FCC Declaration of Conformity Contents Equipment Log and Worksheets Technical ReferenceRegulatory Information Figures WarrantyTables Feature Summary Kit ContentsFront Controls and Indicators Chassis Front Controls and IndicatorsBack I/O Ports and Features Chassis Back I/O Ports and FeaturesChassis Side View Chassis Side ViewHot-swap Bay PeripheralsExternal Bay for 5.25-inch Removable Media Devices Internal Bay for 3.5-inch IDE Hard DrivesSystem Cooling Power SupplyChecking the Power Cord Monitoring System SecurityMechanical Locks Intel Astor II Server Chassis Subassembly Product Guide Tools and Supplies Needed Safety Before You Remove the Side CoverRemoving the Side Cover Removing the Side Cover Installing Chassis FeetRemoving the Hot-swap Bay Removing the Hot-swap BayDisconnect Cables and Remove Screws Removing the IDE Drive BayIDE Hard Drive Bay Rubber Bumper and Standoff Clip Placement Installing Server Board Clips and BumpersShield Installing the Server BoardInstalling the Server Board typical board shown Installing a Chassis Intrusion Switch Installing a Chassis Intrusion SwitchRemoving the Front Cover Removing the Front CoverRemoving the Diskette Drive Installing the Diskette DriveIDE Requirements Installing a Hard Drive into the IDE drive bayHard Drives Drive Cabling ConsiderationsIDE Hard Drive Removing a Hard Drive from the IDE Drive BayInstalling the IDE Drive Bay Remove Filler Panels and EMI Shields Installing a 5.25-inch Peripheral DeviceSnap-in Plastic Slide Rails Removing a 5.25-inch Peripheral Device Installing a Removable Media DeviceInstalling an Add-in Board Installing the Front CoverInstalling the Hot-swap Bay Removing an Add-in Board Installing an Add-in BoardInstalling the Side Cover Mounting a Scsi SCA2 Hard Disk Drive in a Plastic Carrier Hot-swap BayScsi Hard Disk Drives Hard Disk Drive and Plastic Carrier Installing a Scsi SCA2 Hard Disk Drive in the Hot-swap BayHot-swapping a Scsi SCA2 Hard Disk Drive Installing a Hard Disk DriveRemoving the Front Fan Fan Cable Connector PinoutFans Installing the Front Fan Installing the Front FanRemoving a Hot-swap Bay Fan Installing a Hot-swap Bay FanRemoving the Scsi Backplane Hot-swap BackplaneRemoving the Scsi Backplane Installing the Scsi BackplaneRemoving the Front Panel Board Installing the Front Panel BoardFront Panel Board Output Voltages Power Supply SpecificationsPower Supply Output Voltages Input VoltagesEnvironmental Specifications Environmental SpecificationsWide/Fast Scsi 16-Bit Connector Pinout Scsi Hot-swap Backplane ConnectorsUltra2/LVD Scsi 16-Bit Connector Wide/Fast SCA2 Scsi 16-Bit Connector Pinout Ultra2/LVD SCA2 Scsi 16-Bit ConnectorsBackplane Fan Connector Pinout Power ConnectorsBackplane Fan Connector Power Connector PinoutFront Panel Connector Pinout Front Panel Cable ConnectorRegulatory Compliance Safety ComplianceEMC Compliance Regulatory Compliance Markings Electromagnetic Compatibility Notice USAFCC Declaration of Conformity Electromagnetic Compatibility Notices InternationalVarning Installation Safety InstructionsBe UL Listed Use Only for Intended ApplicationsEquipment Log Equipment Log and WorksheetsEquipment Log Current Usage Calculating Power UsageWorksheet, Calculating DC Power Usage Power Usage WorksheetWorksheet, Total Combined Power Used by the System Page Astor II Chassis Subassembly Product Guide Page Avertissement Français Avertissement Français suite Warnung Deutsch Warnung Deutsch Fortsetzung Avvertenza Italiano Avvertenza Italiano continua Advertencias Español Advertencias Españolcontinúa Astor II Chassis Subassembly Product Guide Extent of Limited Warranty WarrantyLimitations of Liability Warranty Limitations and ExclusionsTelephone Support How to Obtain Warranty ServiceReturning a Defective Product