Intermec PRO 128 manual

Page 32
Image 32
Contents PRO 128 Fishfinder Thank YOU Table of Contents HOW Sonar Works Using the Tracker UnitHOW Sonar Works Simulator Operation Feature MemorySimulator Operation What YOU see ON-SCREEN What You See On-ScreenSurface Clutter Rocky Bottom Soft Bottom Hard Bottom What YOU see on Screen Thermoclines. Thermoclines are sharpControl Functions Control FunctionsID+ adds an additional piece of informa Al seconds until a continuous chirp is heard Menu Functions Menu Functions To the userUsing the Tracker Unit Depth Range Right side of the display. Zoom can either operate User controls the location of the Zoom rangeUsing the Tracker Unit Excess of 20 or less than 10 VDC cause the unit to power off Set, and ResetAvailable OFF and ON. The factory setting is OFF. With this setting, the Tracker unit disBlack setting when powered off Bottom Black. There are two selectionsRaw Sonar ID+ On Numeral Size settings are remembered when powered off Using the Diagnostic Feature Using the Diagnostic FeatureAdvanced Features MaintenanceTroubleshooting Maintenance and WarrantyMAINTENANCE/TROUBLESHOOTING Troubleshooting Nothing happens when I turn the unit onThere is no transducer detected There is no bottom reading visible on the displayUnit comes on before I press POWER, and won’t turn off Get gaps in the reading at high speedsHumminbird ONE Year Full Warranty TROUBLESHOOTING/WARRANTYMy unit loses power at high speeds Warranty and Service Policy Service PolicyTransducer along with your unit when sending for repair Customer SupportCustomer Support Further information on Humminbird products can be found atRemove and use for Transducer Installation TOPPage Specifications