Intermec PRO 128 manual Using the Diagnostic Feature

Page 21

USING THE TRACKER UNIT

USING THE DIAGNOSTIC FEATURE

Another frequent use of depth offset is to show the depth beneath the deepest point of the hull. A negative value equal to the distance from the transducer location and the deepest point of the hull will have the same effect as mounting the transducer at the deepest point.

Depth offset is remembered after power is disconnected.

Reset. With the many User Options available to cus- tomize the Tracker unit, it is easy to configure the unit in such a way that it is detrimental to a particular use. By using the Reset function, all variable or user-controlled features of the Tracker unit are returned to the factory settings.

The Reset function is an important first step in troubleshooting problems to ensure that a user selected setting is not the cause for the perceived prob- lem.

USING THE DIAGNOSTIC FEATURE

The Tracker unit contains a powerful diagnostic tool that can aid in deter- mining the cause of a problem.

To use the Diagnostic feature, select the Diagnostic feature on the start-up menu on the initial screen. Diagnostic can also be accessed through the Options menu.

Self Test. Initially, the Tracker unit will perform a self- test. This test confirms the operation of all internal cir- cuitry. At the conclusion of the test, one of two mes-

sages will appear. PASSED indicates the internal test discovered no failures, FAILED indicates a significant internal problem was discovered and the unit requires factory service. A code number appears that tells repair personnel where the problem is.

Transducer Connection. The first connection tested is

Transducer input. If a transducer is detected, the mes-

19

Page 20 Page 22
Image 21
Page 20 Page 22
Contents PRO 128 Fishfinder Thank YOU Table of Contents Using the Tracker Unit HOW Sonar WorksHOW Sonar Works Feature Memory Simulator OperationSimulator Operation What You See On-Screen What YOU see ON-SCREENSurface Clutter Rocky Bottom Soft Bottom Hard Bottom Thermoclines. Thermoclines are sharp What YOU see on ScreenControl Functions ID+ adds an additional piece of informaControl Functions Al seconds until a continuous chirp is heard Menu Functions To the user Menu FunctionsUsing the Tracker Unit Depth Range User controls the location of the Zoom range Right side of the display. Zoom can either operateUsing the Tracker Unit Set, and Reset Excess of 20 or less than 10 VDC cause the unit to power offOFF. With this setting, the Tracker unit dis Available OFF and ON. The factory setting isBlack setting when powered off Bottom Black. There are two selectionsRaw Sonar ID+ On Numeral Size settings are remembered when powered off Using the Diagnostic Feature Using the Diagnostic FeatureMaintenance Advanced FeaturesMaintenance and Warranty MAINTENANCE/TROUBLESHOOTINGTroubleshooting Nothing happens when I turn the unit on TroubleshootingThere is no transducer detected There is no bottom reading visible on the displayGet gaps in the reading at high speeds Unit comes on before I press POWER, and won’t turn offTROUBLESHOOTING/WARRANTY My unit loses power at high speedsHumminbird ONE Year Full Warranty Service Policy Warranty and Service PolicyCustomer Support Transducer along with your unit when sending for repairCustomer Support Further information on Humminbird products can be found atTOP Remove and use for Transducer InstallationPage Specifications
Top Page Image Contents