Intermec PRO 128 manual Warranty and Service Policy

Page 27

MAINTENANCE AND WARRANTY

WARRANTY AND SERVICE POLICY

This warranty is in lieu of all other warranties expressed or implied and no representatives or persons are authorized to provide for any other liability in connection with the sale of our products. Humminbird reserves the right to perform modifications or improvements on its products without incur- ring the obligation to install the changes on units previously manufactured, sold, delivered, or serviced.

THIS IS A FULL WARRANTY AS DEFINED BY THE FEDERAL WARRANTY ACT, EFFECTIVE JULY 4, 1975.

SERVICE POLICY

This Service Policy is valid in the United States only. This applies to Hum- minbird units returned to our factory in Eufaula, Alabama, and is subject to change without notice.

All repair work is performed by factory-trained technicians to meet exact- ing factory specifications. Factory serviced units go through the same rig- orous testing and quality control inspection as new production units.

Even though you’ll probably never need to take advantage of our incredi- ble service guarantee, it’s good to know that we back our units this well. We do it because you deserve the best. We will make every effort to repair your unit within three working days from the receipt of your unit. This does not include shipping time to and from our factory. Units received on Friday are usually shipped by Wednesday, units received Mon- day are usually shipped by Thursday, etc.

We reserve the right to deem any product unserviceable when replace- ment parts are no longer reasonably available or impossible to obtain.

After the original warranty period, a standard flat rate service charge will be assessed for each repair (physical damage and missing parts are not included). Please call our Customer Support Department to verify the ser- vice charge for your unit.

If charges are not prepaid, the unit will be returned C.O.D. If you are expe- riencing problems related to bottom or depth readings, please send your

25

Page 26 Page 28
Image 27
Page 26 Page 28
Contents PRO 128 Fishfinder Thank YOU Table of Contents Using the Tracker Unit HOW Sonar WorksHOW Sonar Works Feature Memory Simulator OperationSimulator Operation What You See On-Screen What YOU see ON-SCREENSurface Clutter Rocky Bottom Soft Bottom Hard Bottom Thermoclines. Thermoclines are sharp What YOU see on ScreenControl Functions ID+ adds an additional piece of informaControl Functions Al seconds until a continuous chirp is heard Menu Functions To the user Menu FunctionsUsing the Tracker Unit Depth Range User controls the location of the Zoom range Right side of the display. Zoom can either operateUsing the Tracker Unit Set, and Reset Excess of 20 or less than 10 VDC cause the unit to power offBottom Black. There are two selections Available OFF and ON. The factory setting isOFF. With this setting, the Tracker unit dis Black setting when powered offRaw Sonar ID+ On Numeral Size settings are remembered when powered off Using the Diagnostic Feature Using the Diagnostic FeatureMaintenance Advanced FeaturesMaintenance and Warranty MAINTENANCE/TROUBLESHOOTINGTroubleshooting There is no bottom reading visible on the display TroubleshootingNothing happens when I turn the unit on There is no transducer detectedGet gaps in the reading at high speeds Unit comes on before I press POWER, and won’t turn offTROUBLESHOOTING/WARRANTY My unit loses power at high speedsHumminbird ONE Year Full Warranty Service Policy Warranty and Service PolicyFurther information on Humminbird products can be found at Transducer along with your unit when sending for repairCustomer Support Customer SupportTOP Remove and use for Transducer InstallationPage Specifications
Top Page Image Contents