Intermec PRO 128 manual Using the Tracker Unit

Page 13

USING THE TRACKER UNIT

MENU FUNCTIONS

After an adjustment is made, the menu disappears and the new sensitivity setting is in affect. If additional time is needed to study a menu, press and hold the MENU button and the menu will remain on-screen indefinitely. If you need to make an additional adjustment, press the UP ARROW or DOWN ARROW button.

Depth Range. The Depth Range function controls the vertical distance displayed on the graphic area of the display. There are

nine depth ranges available. The top of the range is always 0, or the surface of the

water. Ranges of 0–15', 0–30', 0–60',

0–120', 0–180', 0–240', 0–360', 0–480', and 0–600' are available. In the metric version, ranges of 0–5, 0–10, 0–20, 0–40, 0–60, 0–80, 0–110, 0–150, and 0–185 meters are available.The range that positions the bot- tom depiction closest to the bottom of the screen, will best utilize the avail- able display resolution.

The Tracker unit automatically adjusts the depth range depending on the depth of the water. The unit tries to maintain the bottom depiction about ²⁄₃ down the total range (for example, in 20' (6m) of water, the 0-30' (0-10m) range would be select- ed). This provides the best display resolu- tion and therefore the best target separa- tion possible.

The Depth Range can be adjusted manually. Press MENU repeatedly until the Depth Range menu is visible. Two options are available: Auto and Man- ual.

The manual setting enables you to adjust the current depth range setting. The unit no longer adjusts the Depth Range to the most appropriate range for bottom dis- play. Often, the bottom may not be visible on-screen. The digital depth readout

11

Page 12 Page 14
Image 13
Page 12 Page 14
Contents PRO 128 Fishfinder Thank YOU Table of Contents HOW Sonar Works Using the Tracker UnitHOW Sonar Works Simulator Operation Feature MemorySimulator Operation What You See On-Screen What YOU see ON-SCREENSurface Clutter Rocky Bottom Soft Bottom Hard Bottom Thermoclines. Thermoclines are sharp What YOU see on ScreenID+ adds an additional piece of informa Control FunctionsControl Functions Al seconds until a continuous chirp is heard Menu Functions To the user Menu FunctionsUsing the Tracker Unit Depth Range User controls the location of the Zoom range Right side of the display. Zoom can either operateUsing the Tracker Unit Set, and Reset Excess of 20 or less than 10 VDC cause the unit to power offOFF. With this setting, the Tracker unit dis Available OFF and ON. The factory setting isBlack setting when powered off Bottom Black. There are two selectionsRaw Sonar ID+ On Numeral Size settings are remembered when powered off Using the Diagnostic Feature Using the Diagnostic FeatureMaintenance Advanced FeaturesMAINTENANCE/TROUBLESHOOTING Maintenance and WarrantyTroubleshooting Nothing happens when I turn the unit on TroubleshootingThere is no transducer detected There is no bottom reading visible on the displayGet gaps in the reading at high speeds Unit comes on before I press POWER, and won’t turn offMy unit loses power at high speeds TROUBLESHOOTING/WARRANTYHumminbird ONE Year Full Warranty Service Policy Warranty and Service PolicyCustomer Support Transducer along with your unit when sending for repairCustomer Support Further information on Humminbird products can be found atTOP Remove and use for Transducer InstallationPage Specifications
Top Page Image Contents