Intermec PRO 128 manual Using the Tracker Unit

Page 16

Set for large fish only Set for large and medium fish Set for all fish

USING THE TRACKER UNIT

MENU FUNCTIONS

sounds continuously for about five seconds, and then intermittently to remind you that you are still in shallow water.

Fish Alarm. The Fish Alarm alerts you to the presence of fish, or other targets not con- nected to the bottom. The Fish Alarm has three different settings that correspond to the three different size fish symbols shown on-screen.

The default setting is “OFF.” With the “Large fish only” setting, the Tracker unit alarms on only those targets that are repre- sented by the large fish symbols. The Track- er unit can be set to alarm on only large and medium fish, or set to alarm on all fish.

Once the Fish Alarm is enabled, the Tracker unit emits an audible beep when the select- ed size fish symbol appears on-screen. The sound is slightly different for each of the three fish symbol sizes, so with practice, it is possible to distinguish the size of the detected fish without looking

at the unit.

Triplog. Triplog provides a running log of information

based on input from the Temp/Speed sensor.

Since Triplog requires information from the Temp/Speed sensor to oper- ate, if this sensor is not detected by the Tracker unit, the Triplog menu will not appear as an option.

14

Image 16

Contents PRO 128 Fishfinder Thank YOU Table of Contents HOW Sonar Works Using the Tracker UnitHOW Sonar Works Simulator Operation Feature MemorySimulator Operation What YOU see ON-SCREEN What You See On-ScreenSurface Clutter Rocky Bottom Soft Bottom Hard Bottom What YOU see on Screen Thermoclines. Thermoclines are sharpID+ adds an additional piece of informa Control FunctionsControl Functions Al seconds until a continuous chirp is heard Menu Functions Menu Functions To the userUsing the Tracker Unit Depth Range Right side of the display. Zoom can either operate User controls the location of the Zoom rangeUsing the Tracker Unit Excess of 20 or less than 10 VDC cause the unit to power off Set, and ResetAvailable OFF and ON. The factory setting is OFF. With this setting, the Tracker unit disBlack setting when powered off Bottom Black. There are two selectionsRaw Sonar ID+ On Numeral Size settings are remembered when powered off Using the Diagnostic Feature Using the Diagnostic FeatureAdvanced Features MaintenanceMAINTENANCE/TROUBLESHOOTING Maintenance and WarrantyTroubleshooting Troubleshooting Nothing happens when I turn the unit onThere is no transducer detected There is no bottom reading visible on the displayUnit comes on before I press POWER, and won’t turn off Get gaps in the reading at high speedsMy unit loses power at high speeds TROUBLESHOOTING/WARRANTYHumminbird ONE Year Full Warranty Warranty and Service Policy Service PolicyTransducer along with your unit when sending for repair Customer SupportCustomer Support Further information on Humminbird products can be found atRemove and use for Transducer Installation TOPPage Specifications