Intermec PRO 128 manual Thank YOU

Page 2

THANK YOU

THANK YOU FOR CHOOSING YOUR TRACKER FISHFINDER, MADE BY TECHSONIC INDUSTRIES, MANUFACTURER OF AMERICA’S #1 NAME IN FISHFINDERS, HUMMINBIRD. HUMMINBIRD HAS BUILT ITS REPUTATION BY DESIGNING AND MANUFACTURING TOP QUALITY, THOROUGHLY RELIABLE MARINE EQUIPMENT. YOUR TRACKER PRODUCT IS DESIGNED FOR TROUBLE-FREE USE IN EVEN THE HARSHEST MARINE ENVIRONMENT.

IN THE UNLIKELY EVENT THAT YOUR TRACKER DOES REQUIRE REPAIRS, WE OFFER AN EXCLUSIVE SERVICE GUARANTEE. COMPLETE DETAILS ARE INCLUDED AT THE END OF THIS MANUAL.

WE ENCOURAGE YOU TO READ THIS OPERATIONS MANUAL CAREFUL- LY IN ORDER TO GET FULL BENEFIT FROM ALL THE FEATURES AND USES OF YOUR TRACKER PRODUCT. ALSO, TO REGISTER YOUR PURCHASE, AND TO HELP US LEARN MORE ABOUT YOU, PLEASE FILL OUT THE WARRANTY REGISTRATION CARD IN THE CENTER OF THIS MANUAL.

WARNING! THIS DEVICE SHOULD NOT BE USED AS A NAVIGA- TIONAL AID TO PREVENT COLLISION, GROUNDING, BOAT DAM- AGE, OR PERSONAL INJURY. WHEN THE BOAT IS MOVING, WATER DEPTH MAY CHANGE TOO QUICKLY TO ALLOW TIME FOR YOU TO REACT. ALWAYS OPERATE THE BOAT AT VERY SLOW SPEEDS IF YOU SUSPECT SHALLOW WATER OR SUBMERGED OBJECTS.

Image 2

Contents PRO 128 Fishfinder Thank YOU Table of Contents HOW Sonar Works Using the Tracker UnitHOW Sonar Works Simulator Operation Feature MemorySimulator Operation What YOU see ON-SCREEN What You See On-ScreenSurface Clutter Rocky Bottom Soft Bottom Hard Bottom What YOU see on Screen Thermoclines. Thermoclines are sharpControl Functions Control FunctionsID+ adds an additional piece of informa Al seconds until a continuous chirp is heard Menu Functions Menu Functions To the userUsing the Tracker Unit Depth Range Right side of the display. Zoom can either operate User controls the location of the Zoom rangeUsing the Tracker Unit Excess of 20 or less than 10 VDC cause the unit to power off Set, and ResetBlack setting when powered off Available OFF and ON. The factory setting isOFF. With this setting, the Tracker unit dis Bottom Black. There are two selectionsRaw Sonar ID+ On Numeral Size settings are remembered when powered off Using the Diagnostic Feature Using the Diagnostic FeatureAdvanced Features MaintenanceTroubleshooting Maintenance and WarrantyMAINTENANCE/TROUBLESHOOTING There is no transducer detected TroubleshootingNothing happens when I turn the unit on There is no bottom reading visible on the displayUnit comes on before I press POWER, and won’t turn off Get gaps in the reading at high speedsHumminbird ONE Year Full Warranty TROUBLESHOOTING/WARRANTYMy unit loses power at high speeds Warranty and Service Policy Service PolicyCustomer Support Transducer along with your unit when sending for repairCustomer Support Further information on Humminbird products can be found atRemove and use for Transducer Installation TOPPage Specifications