Intermec PRO 128 manual

Contents PRO 128 Fishfinder Thank YOU Table of Contents Using the Tracker Unit HOW Sonar WorksHOW Sonar Works Feature Memory Simulator OperationSimulator Operation What YOU see ON-SCREEN What You See On-ScreenSurface Clutter Rocky Bottom Soft Bottom Hard Bottom What YOU see on Screen Thermoclines. Thermoclines are sharpControl Functions ID+ adds an additional piece of informaControl Functions Al seconds until a continuous chirp is heard Menu Functions Menu Functions To the userUsing the Tracker Unit Depth Range Right side of the display. Zoom can either operate User controls the location of the Zoom rangeUsing the Tracker Unit Excess of 20 or less than 10 VDC cause the unit to power off Set, and ResetBlack setting when powered off Available OFF and ON. The factory setting isOFF. With this setting, the Tracker unit dis Bottom Black. There are two selectionsRaw Sonar ID+ On Numeral Size settings are remembered when powered off Using the Diagnostic Feature Using the Diagnostic FeatureAdvanced Features MaintenanceMaintenance and Warranty MAINTENANCE/TROUBLESHOOTINGTroubleshooting There is no transducer detected TroubleshootingNothing happens when I turn the unit on There is no bottom reading visible on the displayUnit comes on before I press POWER, and won’t turn off Get gaps in the reading at high speedsTROUBLESHOOTING/WARRANTY My unit loses power at high speedsHumminbird ONE Year Full Warranty Warranty and Service Policy Service PolicyCustomer Support Transducer along with your unit when sending for repairCustomer Support Further information on Humminbird products can be found atRemove and use for Transducer Installation TOPPage Specifications