Intermec PRO 128 manual Menu Functions

Page 11

USING THE TRACKER UNIT

CONTROL FUNCTIONS

The ARROW buttons often can be used when no menu is on-screen. In these situ- ations, pressing the ARROW button

affects the function of the active (last- used) menu. This is a short-cut to menu

operation. The menu appears on-screen

while the adjustment is made and times out. A frequently used menu can be adjusted very quickly using this technique.

After an adjustment is made to a menu function, the menu times out after a few seconds and the unit returns to normal operation.

Menu Layout. All menus use the same basic layout. The heading at the top describes the menu function. The UP ARROW and DOWN ARROW symbols to the left of the menu indicate which buttons are available for adjustment. In menus that have several possible settings, a range of adjust- ment indicator shows the total range available and the current setting.

Within the menu are the options available. The selected option or current setting is highlighted in the black box. If no adjustment is made, this is the selected setting. Press an ARROW button while the menu is displayed to select another option.

Several of the menus are multi-step. In some situations if an adjustment is made, additional options become available for further adjustment. Exam- ples of these multi-step menus are Depth Range, Depth Alarm and Zoom. See the detailed description of each function for further explanation.

Menu Functions

Heading

Up Arrow Option

Down Arrow Option

Arrow Symbols

Selected Setting

Range of Adjustment Indicator

9

Page 10 Page 12
Image 11
Page 10 Page 12
Contents PRO 128 Fishfinder Thank YOU Table of Contents HOW Sonar Works Using the Tracker UnitHOW Sonar Works Simulator Operation Feature MemorySimulator Operation What You See On-Screen What YOU see ON-SCREENSurface Clutter Rocky Bottom Soft Bottom Hard Bottom Thermoclines. Thermoclines are sharp What YOU see on ScreenControl Functions Control FunctionsID+ adds an additional piece of informa Al seconds until a continuous chirp is heard Menu Functions To the user Menu FunctionsUsing the Tracker Unit Depth Range User controls the location of the Zoom range Right side of the display. Zoom can either operateUsing the Tracker Unit Set, and Reset Excess of 20 or less than 10 VDC cause the unit to power offBottom Black. There are two selections Available OFF and ON. The factory setting isOFF. With this setting, the Tracker unit dis Black setting when powered offRaw Sonar ID+ On Numeral Size settings are remembered when powered off Using the Diagnostic Feature Using the Diagnostic FeatureMaintenance Advanced FeaturesTroubleshooting Maintenance and WarrantyMAINTENANCE/TROUBLESHOOTING There is no bottom reading visible on the display TroubleshootingNothing happens when I turn the unit on There is no transducer detectedGet gaps in the reading at high speeds Unit comes on before I press POWER, and won’t turn offHumminbird ONE Year Full Warranty TROUBLESHOOTING/WARRANTYMy unit loses power at high speeds Service Policy Warranty and Service PolicyFurther information on Humminbird products can be found at Transducer along with your unit when sending for repairCustomer Support Customer SupportTOP Remove and use for Transducer InstallationPage Specifications
Top Page Image Contents