IBM SY33-0193-00 manual Yes 020, 021, 022

017(continued)

– Run	the Certify	service aid (see “Certify Disk” on page 35) to all the disk dri
are	listed as	rejected.

Go to Step 072 on page 2324-15.

018

(From step 010)

An attempt

has

been made to create a

new

array,

but

the

adapter

already has t

maximum

number of

arrays

defined.

Go

to

“Listing

or

Deleting Records

of

Old

Arrays

in

the

NVRAM” on

page 43,

and

delete

any

array

names

that are

no

longer

used

(dormant).

019

(From step

010)

Attention:

Part

of

the data

that

is

on

the array has been damaged and cannot

be

recoveredBefore.

any

other

action

is

taken,

the

user

must

recover all

the data

that

not

damaged,

and

create

a

backup

of

that

data.

– Using

the

DOS

Configurator,SSA selectAdapter

List

,

then

select the

appropriate

adapter

from

the

list.

– On

the

adapter

menu, SystemelectResources

.

– Select the arrays, one at a time,

and

check

whether

any

array

has one

or

more

invalid

data

strips.

DOES

ANY

ARRAY

HAVE

ONE

OR

MORE

INVALID

DATA

STRIPS?

Yes

No

020

– Review the symptoms.

Go to “MAP 2320: SSA Link” on page 2320-1, and start the problem determination procedure again.

021

– Note the name of the failing array.

Go to Step 022.

022

(From step 021) (Step 022 continues)

MAPs 2324-5