IBM SY33-0193-00 manual Disks, Are ANY Disk Drives LISTED?

Page 76

MAP 2324 (continued)

013(continued)

The status

of

the array changes to Good when the adapter can find all the member

drives of

the

array.

 

 

 

 

014

(From step 012)

Either more than one disk drive has failed, or an array that is not complete has be connected to the IBM SerialRAID Adapter.

If no disk drives have been added to this system, go to Step 015.

If one or more disk drives have been added to this system, and those disk drives previously members of an array on this system or on another system, you must do the following:

– Do the

actions that are described in “Deleting a Resource from the System Resource

List” on

page 43.

– Select the array that is in the Offline state, and delete it.

That array is now a free resource.

– Do the

actions that

are

described in

“Removing a

Disk Drive from an Array” on

page 43,

and remove

all

the disk drives

from the

array.

You can now use those disk drives as free resources.

Locate and repair all failed disk drives, and make those disk drives available for t creation of a new array.

Go to Step 015.

015

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(From

step

014)

 

 

 

 

– Using

the

DOS

Configurator

select

the

appropriate adapter, then from the adapter

menu

 

selectRejected

Disks .

 

 

 

– Using

the

RSM

configurator,

go to

the

Logical RejectedView .and select

ARE ANY

DISK DRIVES LISTED?

 

 

 

Yes

No

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

016

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

– Ask the user to delete and recreate the array that is in the Offline state.

017

– Run nonconcurrent diagnostics to all the disk drives that are listed as rejected. (Step 017 continues)

2324-4IBM SerialRAID Adapter Maintenance Information

Image 76
Contents IBM Page Maintenance Manual OctoberFirst 1998Contents Identify About This Supplement How This Book Is OrganizedRelated Publications SerialRAID Adapter Installation and , User’s S33-3283GuideIBM SerialRAID Adapter Technical ,ReferenceSA33-3275-01 SerialRAID Adapter Installation and Usersfor moreGuidetails SerialRAIDGeneral Information Using the SRN Table See InstallationDisplaying SRNs SRN TableAdapters Unless You are instructed Repair Verification VerifyService Request Numbers SRNs5 SSA Service Request Numbers SRNs7 FRU List Service Request Numbers SRNs9 40% Service Request Numbers SRNs11 SSA Loop Configurations that Are Not Valid Software and Microcode ErrorsDealing with Fast-Write Problems Service Request Numbers SRNs13 IBM SerialRAID Adapter Maintenance Information SSA Link Error Problem Determination ExampleLink Status Lights Locating a Broken Loop LightIBM SerialRAID Adapter Maintenance Information Replacement Disk Drives Using the DOS ConfiguratorDisk Exchanging a Non-Array Disk DriveConfigurator UsingGuide RSMUsing Exchanging an Array Disk Using the RSM ConfiguratorExchanging an Array Disk ListModule IBM SerialRAID Adapter Maintenance Information Exchanging the Fast-Write Cache Card Installing a DramRemoving the Cache Card Refer to Figure Remove Pin2/ Card Removing the Fast-Write Cache CardDirection shown by the arrow in the diagram, and plug it Installing the Collar and Pin of the Fast-Write Cache Card Service Aids and Other Disk Service AidsAdapter Installation Users Guide Accessing Service Aids fromAccessing Service Aids ConfiguratorService Mode To Set Service Mode with the DOS ConfiguratorHere Loop Is broken Between Third Fourth disk Drives Status To Set Service Mode With the RSM Configurator Format Disk To Format Using the DOS Configurator To Certify using the DOS Configurator To Format With the RSM ConfiguratorCertify Disk To Certify With the RSM Configurator To Identify with the DOS Configurator To Identify With the RSM ConfiguratorIdentify Function Download Microcode FunctionAre Available Finding the PhysicalFinding the Device When Finding the DeviceEvent/Error Logger Error SummaryLog View SSA Event LogIBM SerialRAID Adapter Maintenance Information Maintenance Tasks To aUsing the RSM Configurator From ListArray NvramModifying Attributes of Resources Maintenance ManualSelectNot Present Blank Slot Creating an Array To create an array To select the disk drives for the arrayIBM SerialRAID Adapter Maintenance Information Attaching a Resource IBM SerialRAID Adapter Maintenance Information Introduction UtilitiesEvent IBM SerialRAID Adapter Maintenance Information BOOK? YOUSRN? MAP Is the SRN 45PAA?015 2010-4IBM SerialRAID Adapter Maintenance Information MAP 2320 SSA Link IBM the SerialRAID Adapter Installation . Users GuideANY Are 012 TextBreakFAILING? 013016 TextBreak Is aYes 017 0182320-6IBM SerialRAID Adapter Maintenance Information Error MAP 2323 SSA IntermittentPAA Example 2323-4IBM SerialRAID Adapter Maintenance Information SelectDisk Service Aids MAP 2324 SSA RAIDDo YOU have SRN 49500? Did the Diagnostics Give YOU ANY Other SRN?Yes No 002 Not Necessarily by You? ActionDisks Are ANY Disk Drives LISTED?019 Yes 020021 022Did Did the Certify Service AID Fail AGAIN? Open LOOP? 038Adapter Installation . Users Guide Yes 039040 041047 Yes 046048 Modify Attributes Use Hot051 Is the Problem SOLVED? SelectSSA Adapter ListOn ANY ARRAY? 054059 060Yes No 061 062066 065Yes No 067 RAID Checkout 069Yes No 070 071075 Yes No 076077 Or MoreInto 089 090Yes 091 092How 2324-20IBM SerialRAID Adapter Maintenance Information MAP 2410 SSA Repair Verification APPLICABLE?Are ALL Check Lights OFF? Yes No 005006 You have just exchanged a disk drive Page IBM