IBM SY33-0193-00 manual Yes 039, 040, 041, Adapter Installation . Users Guide, Listed?

038(continued)

DOES	ANY SSA DISK DRIVE HAVE ITS CHECK LIGHT ON?
Yes	No

039

The disk drive might have been removed from the subsystem.

– Reinstall the removed drive, or select a new disk drive for addition to the

– Do the actions described in “Adding a Disk Drive to an Array” on page 44.

–Referring to the displayed instructions, select a disk from the list of arra candidate disk drives, and add that disk drive to the array that is in th Degraded state.

The array changes its state to the Good state, and parity is rebuilt.

040

– Exchange the failed disk drive for a new one (see “Exchanging Disk Drives” on page 19).

Go to Step 090 on page 2324-18.

041

(From

step

010)

An

array

is

in

the Exposed

state

when

one

member

disk drive

of

the

array

is

not

available. When

an array is in the Exposed state, its data is not protected. A

command

line

parameter is available to prevent write operations to

an

array

that

is

the

Exposed

state. ReferIBM toSerialRAIDthe

Adapter:

Installation

and . User's

Guide

for

information

on

array

states.

– Using

the

SSA

Configurator and

Service

Aids

Utility,

select the

appropriate

adapte

then

from

the

adapter

menuRejectedselectDisks .

– Using

the

RSM

configurator,

go

to

the

LogicalRejectedView .and

select

ARE

ANY

DISK

DRIVES

LISTED?

Yes

No

042

A

disk

drive has not been detected by

the

adapter. Go

to

Step 045 on

page

2324-10.

043

– Run nonconcurrent diagnostics to all the

disk

drives

that

are

listed

as rejected.

(Step 043

continues)

MAPs 2324-9