INSPECTION/SETUP

NOTICE

When the antifreeze is mixed with water, the antifreeze mixing ratio must be less than 50%.

CLEANING THE RADIATOR

The engine may overheat if the radiator fi ns become overloaded with dust or debris. Periodically clean the radiator fi ns with compressed air. Cleaning inside the machine is dangerous, so clean only with the engine turned off and the negative battery terminal disconnected.

AIR CLEANER

Periodic cleaning/replacement is necessary. Inspect it in accordance with the KUBOTA Engine Owner’s Manual.

Fan Belt Tension

A slack fan belt may contribute to overheating, or to insufficient charging of the battery. Inspect the fan belt for damage and wear and adjust it in accordance with the Kubota Engine Owner's Manual.

The fan belt tension is proper if the fan belt bends 10 to 15

mm(Figure 12) when depressed with the thumb as shown below.

BATTERY

This unit is of negative ground DO NOT connect in reverse. Always maintain battery fluid level between the specified marks. Battery life will be shortened, if the fluid level are not properly maintained. Add only distilled water when replenishment is necessary.

DO NOT over fill. Check to see whether the battery cables are loose. Poor contact may result in poor starting or malfunctions. Always keep the terminals firmly tightened. Coating the terminals with an approved battery terminal treatment compound. Replace battery with only recommended type battery.

The battery is sufficiently charged if the specific gravity of the battery fluid is 1.28 (at 68° F). If the specific gravity should fall to 1.245 or lower, it indicates that the battery is dead and needs to be recharged or replaced.

Before charging the battery with an external electric source, be sure to disconnect the battery cables.

Battery Cable Installation

ALWAYS be sure the battery cables (Figure 13) are properly connected to the battery terminals as shown below. The red cable is connected to the positive terminal of the battery, and the black cable is connected to the negative terminal of the battery.

CAUTION

ALWAYS disconnect the negative terminal FIRST and reconnect negative terminal LAST.

Figure 12. Fan Belt Tension

CAUTION

NEVER place hands near the belts or fan while the generator set is running.

Figure 13. Battery Connections

PAGE 26 — DA7000 SERIES GENERATORS• OPERATION AND PARTS MANUAL — REV. #5 (01/20/11)

Page 26
Image 26
Multiquip DA7000WGH, DA700SSW manual Cleaning the Radiator, AIR Cleaner, Fan Belt Tension, Battery Cable Installation

DA700SSW, DA7000WGH specifications

The Multiquip DA7000WGH and DA700SSW are exceptional diesel-powered generators designed to deliver reliable power across a variety of demanding applications. Known for their durability and efficiency, these generators are ideal for construction sites, events, and backup power needs.

The DA7000WGH model features a robust 7000-watt output, making it suitable for heavy-duty tasks. It is powered by a water-cooled, four-cylinder diesel engine, which not only ensures longer operational life but also minimizes noise levels during use. The generator is equipped with a heavy-duty steel frame that provides superior protection against the rigors of job site environments. Additionally, its compact design allows for easy transport and maneuverability, making it a practical choice for contractors and event organizers alike.

In terms of technology, the DA7000WGH includes advanced digital instrumentation. An intuitive control panel offers easy access to critical information such as voltage, frequency, and operating hours. This feature allows users to monitor the generator's performance effectively, ensuring optimal operation and preemptive maintenance. Moreover, the generator boasts an integrated fuel gauge and an automatic low oil shut-off feature that enhances both safety and longevity.

On the other hand, the DA700SSW model presents an equally impressive set of features tailored for those requiring a quieter operation. Utilizing a sound-attenuated enclosure, it significantly reduces noise levels without sacrificing power output. This makes the DA700SSW an excellent choice for outdoor events, festivals, and applications where noise restrictions may apply.

Both models incorporate a heavy-duty alternator designed to provide clean and stable power, critical for sensitive electronics. The generators are also equipped with multiple output options, including 120V and 240V outlets, ensuring versatility for a range of equipment and tools.

In conclusion, the Multiquip DA7000WGH and DA700SSW generators stand out for their combination of power, durability, and advanced technology. Whether you require a rugged workhorse for a construction project or a quieter model for an outdoor event, these generators deliver reliable performance tailored to meet various demands. With their advanced features and easy transportability, they represent a smart investment for anyone in need of dependable power solutions.