TRAILER GUIDELINES

SAFETY CHAINS

If the coupler connection comes loose, the safety chains can keep the trailer attached to the tow vehicle. With properly rigged safety chains, it is possible to keep the tongue of the trailer from digging into the road pavement, even if the coupler-to-hitch connection comes apart.

JACKSTAND

A device on the trailer that is used to raise and lower the coupler. The jack is sometimes called the “landing gear” or the “tongue jack”.

COUPLER TYPES

Two types of coupler used with the trailer are discussed below.

Ball Hitch Coupler

Pintel Eye Coupler

BALL HITCH COUPLER

A ball hitch coupler (Figure C) connects to a ball that is located on or under the rear bumper of tow vehicle. This system of coupling a trailer to a tow vehicle is sometimes referred to as “bumper pull.”

A ball hitch trailer may be fitted with a tongue jack that can raise and lower the coupler. The tongue jack is mounted to the A-frame (front or tongue) part of the trailer. By rotating the jack handle clockwise, the jack will extend and raise the tongue of the trailer.

Figure C. Ball Hitch Coupler

Before each tow, coat the ball with a thin layer of automotive bearing grease to reduce wear and ensure proper operation.

Check the locking device that secures the coupler to the ball for proper operation.

If you see or feel evidence of wear, such as fl at spots, deformations, pitting or corrosion, on the ball or coupler, immediately have your dealer inspect them to determine the proper action to prevent possible failure of the ball and coupler system. All bent or broken coupler parts must be replaced before towing the trailer.

The coupler handle lever must be able to rotate freely and automatically snap into the latched position. Oil the pivot points, sliding surfaces, and spring ends with SAE 30W motor oil. Keep the ball socket and latch mechanism clean. Dirt or contamination can prevent proper operation of the latching mechanism.

The load rating of the coupler and the necessary ball size are listed on the trailer tongue.You must provide a hitch and ball for your tow vehicle where the load rating of the hitch and ball is equal to or greater than that of your trailer.

Also, the ball size must be the same as the coupler size. If the hitch ball is too small, too large, is underrated, is loose or is worn, the trailer can come loose from the tow vehicle and may cause death or serious injury.

THE TOW VEHICLE, HITCH AND BALL MUST HAVE A RATED TOWING CAPACITY EQUAL TO OR GREATER THAN THE TRAILER Gross Vehicle Weight Rating

(GVWR). IT IS ESSENTIAL THAT THE HITCH BALL BE OF THE SAME SIZE AS THE COUPLER.

The ball size and load rating (capacity) are marked on the ball. Hitch capacity is marked on the hitch.

WARNING

Coupler-to-hitch mismatch can result in uncoupling, leading to death or serious injury.

Be sure the LOAD RATING of the hitch ball is equal or greater than the load rating of the coupler.

Be sure the SIZE of the hitch ball matches the size of the ball coupler.

PAGE 42 — DA7000 SERIES GENERATORS• OPERATION AND PARTS MANUAL — REV. #5 (01/20/11)

Page 42
Image 42
Multiquip DA7000WGH, DA700SSW manual Safety Chains, Jackstand, Coupler Types, Ball Hitch Coupler

DA700SSW, DA7000WGH specifications

The Multiquip DA7000WGH and DA700SSW are exceptional diesel-powered generators designed to deliver reliable power across a variety of demanding applications. Known for their durability and efficiency, these generators are ideal for construction sites, events, and backup power needs.

The DA7000WGH model features a robust 7000-watt output, making it suitable for heavy-duty tasks. It is powered by a water-cooled, four-cylinder diesel engine, which not only ensures longer operational life but also minimizes noise levels during use. The generator is equipped with a heavy-duty steel frame that provides superior protection against the rigors of job site environments. Additionally, its compact design allows for easy transport and maneuverability, making it a practical choice for contractors and event organizers alike.

In terms of technology, the DA7000WGH includes advanced digital instrumentation. An intuitive control panel offers easy access to critical information such as voltage, frequency, and operating hours. This feature allows users to monitor the generator's performance effectively, ensuring optimal operation and preemptive maintenance. Moreover, the generator boasts an integrated fuel gauge and an automatic low oil shut-off feature that enhances both safety and longevity.

On the other hand, the DA700SSW model presents an equally impressive set of features tailored for those requiring a quieter operation. Utilizing a sound-attenuated enclosure, it significantly reduces noise levels without sacrificing power output. This makes the DA700SSW an excellent choice for outdoor events, festivals, and applications where noise restrictions may apply.

Both models incorporate a heavy-duty alternator designed to provide clean and stable power, critical for sensitive electronics. The generators are also equipped with multiple output options, including 120V and 240V outlets, ensuring versatility for a range of equipment and tools.

In conclusion, the Multiquip DA7000WGH and DA700SSW generators stand out for their combination of power, durability, and advanced technology. Whether you require a rugged workhorse for a construction project or a quieter model for an outdoor event, these generators deliver reliable performance tailored to meet various demands. With their advanced features and easy transportability, they represent a smart investment for anyone in need of dependable power solutions.