Sterling SSV 05 operating instructions Ssv

Page 11

SM4-600

SSV 05

Do not carry through modifications, attachments or alterations of the unit without the manufacturer’s permission. Danger of accidents!

By means of this operating manual, prepare precise instructions for use of this unit. Faulty operation may lead to accidents!

Designate a unit leader responsible for the unit.

In any case, the operators of this unit must be thoroughly instructed. Faulty operation may lead to accidents!

If the unit has been switched off for reasons of safety, it must be protected from unathorised activation. Danger of accidents!

Before beginning maintenance work, designate a supervisor.

Before beginning maintenance work, inform the responsible operating personnel. Danger of accidents!

Before beginning maintenance work, interrupt the mains supply so that the unit is not switched on unintentionally. Danger of accidents!

Repair work may only be carried through by trained personnel. Danger of accidents!

The unit may never be operated when it is partially disassembled. Limbs may be drawn in! Electrical shock!

In case of functional disturbances, switch off the unit immediately. Errors must be eliminated immediately. Danger of accidents!

The unit is exclusively intended for conveying plastic granules and regrind. Any other usage is not permitted.

This unit is not suitable for processing foods.

Safety instructions 10

Image 11
Contents Sterling Material Processing Operating Instructions Single Conveyor Unit SSVParts and Service Department Telephone 800 Edition 08/99 Technical serviceSSV Sterling Material Processing SSV Table of contents SSV Technical data Safety instructions Safety instructionsSSV SSV Explanations and information SSV For your safety SSV SSV SSV For the safety of the units Installation instructions SSV General information SSV Installing the conveyor hopper SSV Installing the control and maintenance unit SSV Connecting the compressed-air supply SSV Electrical connection Functional description SSV Method of functioning Control and maintenance unitSet-up Filling level too high Basic setting of the filling level in the conveyor hopperSSV Preparations Filling level too lowSet-up Maintenance SSV SSV Maintenance intervals Disassembly SSV Cleaning/replacing the filter cartridgeAdjusting the level probe SSV AssemblyTest steps SSV Trouble-shooting Problem RemedyTechnical data SSV Dimension sheet SSV Spare parts list SSV Pos ID-No Designation