Sterling SSV 05 operating instructions SSV Cleaning/replacing the filter cartridge, Disassembly

Page 28

SSV 05

5.2. Cleaning/replacing the filter cartridge

»

Switch off the unit.

Disconnect the mains plug.

Disassembly

Remove the filter cartridge (A).

Blow out the filter cartridge (A) from the inside out by means of compressed air or replace the filter.

Open the tension ring (B).

Remove the nozzle (C) and the sieve (D).

Check the sieve (D) for material residue. Clean the sieve (D) by means of com- pressed-air. Replace the sieve and sealing ring in case of damage.

A

CD

B

SM4-600

Maintenance 27

Image 28

Contents Operating Instructions Single Conveyor Unit SSV Sterling Material ProcessingParts and Service Department SSV Sterling Material Processing Technical serviceTelephone 800 Edition 08/99 SSV Table of contents SSV Technical data Safety instructions Safety instructionsSSV SSV Explanations and information SSV For your safety SSV SSV SSV For the safety of the units Installation instructions SSV General information SSV Installing the conveyor hopper SSV Installing the control and maintenance unit SSV Connecting the compressed-air supply SSV Electrical connection Functional description Control and maintenance unit SSV Method of functioningSet-up Basic setting of the filling level in the conveyor hopper SSV PreparationsFilling level too low Filling level too highSet-up Maintenance SSV SSV Maintenance intervals SSV Cleaning/replacing the filter cartridge DisassemblySSV Assembly Adjusting the level probeSSV Trouble-shooting Problem Remedy Test stepsTechnical data SSV Dimension sheet SSV Spare parts list SSV Pos ID-No Designation