Sterling SSV 05 operating instructions SSV Maintenance intervals

Page 27

SSV 05

5.1. Maintenance intervals

daily:

Check the setting of the pressure reducer.

 

Empty the water separator.

Check the danger signs on the unit for legibility

 

and completeness.

monthly:

Clean the filter and sieve

 

(depending on accumulation of dust!).

 

Blow out the filter from the inside out by means

 

of compressed air.

Check the unit plugs for proper functioning.

every six months:

Check all electrical and mechanical connections

 

for proper fit.

Replace the filter and the sieve

(depending on accumulation of dust!).

F

The given maintenance intervals are average values.

Check whether in your individual case the maintenance in- tervals must be shortened.

SM4-600

Maintenance 26

Image 27
Contents Sterling Material Processing Operating Instructions Single Conveyor Unit SSVParts and Service Department Technical service SSV Sterling Material ProcessingTelephone 800 Edition 08/99 SSV Table of contents SSV Technical data Safety instructions Safety instructionsSSV SSV Explanations and information SSV For your safety SSV SSV SSV For the safety of the units Installation instructions SSV General information SSV Installing the conveyor hopper SSV Installing the control and maintenance unit SSV Connecting the compressed-air supply SSV Electrical connection Functional description SSV Method of functioning Control and maintenance unitSet-up Filling level too high Basic setting of the filling level in the conveyor hopperSSV Preparations Filling level too lowSet-up Maintenance SSV SSV Maintenance intervals Disassembly SSV Cleaning/replacing the filter cartridgeAdjusting the level probe SSV AssemblyTest steps SSV Trouble-shooting Problem RemedyTechnical data SSV Dimension sheet SSV Spare parts list SSV Pos ID-No Designation