Sterling SSV 05 operating instructions SSV For your safety

Page 10

SSV 05

1.3. For your safety

The operators of this unit must be at least 16 years old.

Before initial operation, read this operating manual carefully. Observe all points. Inquire in case of uncertainties.

This will avoid danger to persons and damage of material!

Store this operating manual in such a way that it is always available on the site of operation for the unit. Faulty operation may lead to accidents!

Note that, for reasons of clarity, not every possible case of operation or mainte- nance can be mentioned.

Note the instructions for safety and the danger signs on the unit. This will avoid danger to persons and damage of material!

All work on the unit may only be carried out by persons whose qualification corre- sponds with the individual chapters of the operating manual.

Faulty operation may lead to accidents!

For all types of work on the unit, proper working clothes must be worn. This will avoid danger to persons!

Compare the connected loads to those of the mains supply. Danger of electrical shock!

When using lifting gear, observe the specific instructions.

Danger of accidents!

Observe the local regulations and requirements concerning the plant.

Interrupt the mains supply for all types of work on electrical components. Danger to life due to electrical shock!

SM4-600

Safety instructions 9

Image 10
Contents Operating Instructions Single Conveyor Unit SSV Sterling Material ProcessingParts and Service Department SSV Sterling Material Processing Technical serviceTelephone 800 Edition 08/99 SSV Table of contents SSV Technical data Safety instructions Safety instructionsSSV SSV Explanations and information SSV For your safety SSV SSV SSV For the safety of the units Installation instructions SSV General information SSV Installing the conveyor hopper SSV Installing the control and maintenance unit SSV Connecting the compressed-air supply SSV Electrical connection Functional description Control and maintenance unit SSV Method of functioningSet-up Filling level too low Basic setting of the filling level in the conveyor hopperSSV Preparations Filling level too highSet-up Maintenance SSV SSV Maintenance intervals SSV Cleaning/replacing the filter cartridge DisassemblySSV Assembly Adjusting the level probeSSV Trouble-shooting Problem Remedy Test stepsTechnical data SSV Dimension sheet SSV Spare parts list SSV Pos ID-No Designation