Sterling SSV 05 operating instructions Ssv

Page 12

SSV 05

Attachments which are not delivered by Sterling must be constructed according to the safety standard EN 294. Danger of accidents!

Check all lines, hoses and coupling pieces in regular intervals for leakages and damage. Any errors must be eliminated immediately. Danger of accidents!

Before beginning maintenance work, set all compressed-air lines on the unit at zero pressure. Danger of accidents!

The unit may only be operated if all corresponding components have been prop- erly connected and are in accordance with the relevant regulations.

Observe the safety instructions for the connected units.

SM4-600

Safety instructions 11

Image 12
Contents Operating Instructions Single Conveyor Unit SSV Sterling Material ProcessingParts and Service Department Technical service SSV Sterling Material ProcessingTelephone 800 Edition 08/99 SSV Table of contents SSV Technical data Safety instructions Safety instructionsSSV SSV Explanations and information SSV For your safety SSV SSV SSV For the safety of the units Installation instructions SSV General information SSV Installing the conveyor hopper SSV Installing the control and maintenance unit SSV Connecting the compressed-air supply SSV Electrical connection Functional description Control and maintenance unit SSV Method of functioningSet-up Basic setting of the filling level in the conveyor hopper SSV PreparationsFilling level too low Filling level too highSet-up Maintenance SSV SSV Maintenance intervals SSV Cleaning/replacing the filter cartridge DisassemblySSV Assembly Adjusting the level probeSSV Trouble-shooting Problem Remedy Test stepsTechnical data SSV Dimension sheet SSV Spare parts list SSV Pos ID-No Designation