Sterling SSV 05 operating instructions Ssv

Page 8

SSV 05

1.1. Warnings and symbols

The following warnings and symbols are used in these operating instructions:

»

L

F

This symbol indicates danger to life! Fatal or serious injury is possible if the corresponding instructions, regulations or warn- ings are not observed.

This symbol indicates that serious injury is possible if the cor- responding instructions, regulations or warnings are not observed.

This symbol indicates that extensive damage to equipment is possible if the corresponding instructions, regulations or warnings are not observed.

&

This symbol indicates information important for becoming fa- miliar with the equipment, i.e. technical correlations.

$

This symbol indicates that a technical term is explained at this point.

SM4-600

Safety instructions 7

Image 8
Contents Operating Instructions Single Conveyor Unit SSV Sterling Material ProcessingParts and Service Department Telephone 800 Edition 08/99 Technical serviceSSV Sterling Material Processing SSV Table of contents SSV Technical data Safety instructions Safety instructionsSSV SSV Explanations and information SSV For your safety SSV SSV SSV For the safety of the units Installation instructions SSV General information SSV Installing the conveyor hopper SSV Installing the control and maintenance unit SSV Connecting the compressed-air supply SSV Electrical connection Functional description Control and maintenance unit SSV Method of functioningSet-up Basic setting of the filling level in the conveyor hopper SSV PreparationsFilling level too low Filling level too highSet-up Maintenance SSV SSV Maintenance intervals SSV Cleaning/replacing the filter cartridge DisassemblySSV Assembly Adjusting the level probeSSV Trouble-shooting Problem Remedy Test stepsTechnical data SSV Dimension sheet SSV Spare parts list SSV Pos ID-No Designation