Micronics 216 manual Attach Sensors, Select Enter and the display will now show

Page 8

QUICK START

Select pipe lining material:

Steel

Rubber

Glass

Epoxy

Concrete

Other (mps)

Select fluid type now appears on the display.

Use the scroll keys to select the fluid type and press ENTER.

If the liquid is not listed select Other and enter a liquid sound speed in metres/second. The sound speed information can be found in the back of the manual under Liquid Sound Speeds.

QUICK START

Select fluid type:

Water

Glycol/water 50/50

Lubricating oil

Diesel oil

Freon

Other (m/sec)

Attach Sensors

The instrument will now provide the user with details of the mode of operation. It will also give the approximate maximum velocity that can be achieved with the sensors provided. Use the keypad to check the other maximum volumetric flow.

Connect the RED and BLUE sensor cables, between the guide rail and the electronics.

Attach sensors in

REFLEX mode

Approx. max. flow:

7.20m/s

ENTER to continue

SCROLL changes mode

Select Enter and the display will now show:

Fluid temp? (°C)

Enter the application temperature and press Enter.

8

Image 8
Contents Portaflow Fast Track Set up Procedure Inverted view of grease applied to sensor block Connectors Pulse Cable ConnectionsTransducers Battery CircuitKeypad Main Menu Quick Start Switch 0n…Option number for the software Main Menu Enter MillimetresAttach Sensors Select Enter and the display will now showError Messages Appear Here Main Menu View/Edit Site DataXXX VIEW/EDIT Site DataDimension Units List SitesSite Number Site NameMain Menu Select Sensor mode Sensor ModeRead Flow Sensor SETMain Menu Set Up Instrument Pulse Output Key EnabledDisplay backlight Application OptionsOptions Key Main Menu Read FlowDelete Key Reset + Total/- Total TotalDamping sec Calibration FactorError Messages Status MessagesTemperature range is -20C to +125C W6 mA OUT OverangeW8 mA Load to High Other MessagesReflex mode Enter a lining thickness firstTransducer Positioning Mounting the TransducersCorrectincorrect Liquid ConditionsPropagation Velocity or Sound Speed Reynolds NumberMaximum Flow Application TemperatureTo calculate Re use the following formula Gull wing and spring attachment Peizo electric crystal Red connector upstreamBlue connector downstream Battery Pack EnclosureSupply Voltage OutputsWarranty Liquid Sound Speeds H2OSubstance Form Index Specific Gravity Sound Speed ∆ v/ºC C4H9NO CH2I2C2H3N CH3CO2O C2H6O C2H7NO C2H5IC6H5F C3H8O C3H8OCH4 CH4O C7H9N C7H9N CH4O C7H8C3H8O C7H8O C4H9NO C6H5NO2 CH3NO2 C9H2OKNO3 H2O CH4O C2H6O H2SO4CF4 C4H9NO Charging Controller IC Charging VoltageInstrument differences SoftwareQuicker full charge Examples