Furuno FSV-24S installation manual Monitor cable 10S2074 or 10S2075, Control cable

Armor

Solder lead wire to armor and connect it to #1 pin of connector.

	Cable DPYCY-1.5
Vinyl sheath
		Armor
		Vinyl
Taping		sheath
Use cable DPYCY-1.5	Conductor	2
(Japan standard cable)	S = 1.5 mm

or equivalent cable. ∅ = 1.56 mm

Assembling connector NCS-253-P

2.4.3Monitor cable (10S2074 or 10S2075)

Connect the monitor cable 10S2074 or 10S2075 (from the monitor unit) to the connectors in the processor unit shown below.

38P connector:	CN-A103 (For the optional sub-display, CN-A108)
D-sub 25 pin:	CN-A102 (For the optional sub-display, CN-A107)
D-sub 15 pin:	CN-A104 (For the optional sub-display, CN-A109)

2.4.4Control cable

For blackbox type, attach the control cable (10S2076) to the CN-A103 connector in the processor unit. The control unit for the sub-display unit should be connected to the CN-A108 connector.

2-10