Furuno FSV-24S installation manual EXT Data Setting menu, Speed & Course

3.4.2	EXT DATA SETTING menu
		MENU		QUIT
		EXT DATA SETTING		QUIT
		DATE&TIME	: CIF
		HEADING	: AD10S
		LOG PULSE	: 200p/NM
		SPEED&COURSE	: NMEA
		SPEED SENSOR	: GPS/DR
		LAT/LON	: NMEA
		POSITIONING SENSOR	: AUTO SEL.
		WATER DEPTH	: NMEA
		WATER TEMP.	: NMEA
		WATER CURRENT	: CIF
		WIND	: CIF

EXT DATA SETTING menu

DATE & TIME

Select input port of data and time data. (NONE, CIF, NMEA)

HEADING

Select input port of the heading data. (NONE, AD10S, CIF, NMEA)

LOG PULSE

Set the pulse rate per 1 nm for the distance pulse signal. (200 p/NM, 400 p/NM)

SPEED & COURSE

Select the input port for the ship’s speed and course data input. When selecting the LOG&HEADING, the heading data is used instead of the course data. (NONE, LOG&HEADING, CIF, NMEA)

SPEED SENSOR

Select the source for the speed and course data. This setting is ineffective when LOG&HEADING is selected as speed and course source. (NONE, GPS/DR,

DOPPLER/DR)

LAT/LON

Select the input port for the ship’s position data. (NONE, CIF, NMEA)

POSITIONING SENSOR

Select the type of the navigator. When selecting AUTO SEL., the priority is GPS/DR>LORAN-C. (LORAN-C, GPS/DR, AUTO SEL.)

3-9