Creative E-MU manual Aftertouch On/Off, Semitone Transpose, Tips for Use…

Page 37

Basic Operations

Tips for Use…

Assuming you wish to use the “CC Send On Recall” feature with a particular patch, turn this option on while editing the controller initial value settings in that patch. Once you’ve stored the patch with the desired initial controller settings, switch this option oFF and store the patch one more time. This will save the oFF setting for this option in the patch. Since the on/oFF setting will also be recalled whenever you recall the patch, the oFF setting ensures that the initial controller settings won’t be accidentally overwritten if you later change some other setting in the patch and store it again. If you later want to change one or more of these settings, simply switch the setting back on before storing the patch with the updated settings (and don’t forget afterwards to switch the option back oFF and store the patch again as described above, to lock in the updated settings).

Aftertouch On/Off

When Aftertouch is On, the keyboard will transmit channel aftertouch messages. Aftertouch is transmitted when additional pressure is applied to the keyboard after the keys have been pressed.

Select on to turn Aftertouch on, or oFF to turn it off.

Note: This setting, unlike most of the settings described in this section, is a device setting, which is not stored in or recalled from patches. It is thus also a global setting which affects all patches in common – or rather, it affects device behavior independently of patches.

Semitone Transpose

The keyboard can be transposed up or down in one-semitone steps. Transpose works by shifting the keyboard position relative to middle C.

The transposition range is -64 to +63 semitones.

Note: Semitone Transpose is disabled when Zones are enabled.

Xboard

37

Image 37

Contents Xboard Asia Pacific Africa, Middle East MU World Headquarters MU SystemsEurope Japan Creative Media K. KTable of Contents Xboard 61 Panel Controls Back Panel Description Powering the XboardBasic Operations Appendix MU Xboard ControlIndex MU Systems Introduction Requirements Hardware InstallationOn a PC On a MacUSB Connection Connecting the Xboard to your ComputerMidi Connection Midi Midi InterfaceMacintosh OS Software InstallationWindows Click Start „ Settings „ Control Panel Uninstalling all Audio Drivers and ApplicationsWindows XP To confirm the problem, do the following TroubleshootingLost Communication Wrong Driver in Windows XP or WindowsIntroduction Introduction Click Have Disk Windows 2000 „ You may recover by doing the followingMidi Indicators Data Entry / Master Volume SliderMain Panel Controls EditEnter Store PatchOctave Down Octave UpLatch Mode Channel Control ModeMidi Channel Select Knob BypassChannel Controller mode Normal mode3D Midi and Nrpn mode Controller KnobsXboard 61 Panel Controls Zones EnablePatch Select / Numeric Keypad Keyboard Zones ButtonsProgram Change Mode Using the Numeric KeypadBack Panel Description Inserting Batteries into the Xboard Powering the XboardTo Insert Batteries This Side Not UsedBasic Operations To Select a Patch Using the Main PanelEntering Data Selecting and Storing PatchesChanging the Midi Channel To Select a Patch Using Direct Patch Select Buttons XboardTo Store a Patch To Change the Midi ChannelTransposing the Keyboard Channel Control ModeChanging Controller CC Channel Numbers To Change Controller CC Channel NumbersTo Enable or Disable the Zones Function To Select 16 Channel Control ModeTo Enable or Disable a Specific Zone Working With ZonesTo Select Latch Mode Latch Mode, Zones DisabledSnap Shot Latch Mode, Zones EnabledTo Set the Keyboard Range of Latched Notes Editing Patch and Device Settings Bypass ModeTo Edit a Setting Scrolling Text Display Editing Patch Device SettingsPGM Send on Recall Edit ParametersBank Sel MSB Send Program ChangeTo Send an External Program Change Xboard Bank Sel LSB Program Change PGM Browse ModeTo Browse Midi Program Changes Save CC Value in Patch CC Send On RecallSemitone Transpose Aftertouch On/OffTips for Use… Channel CC Number Velocity Curve SelectLatch High/Low Note X1 Menu Items X1 and X2 FunctionsTo Select one of the X1 or X2 Functions CCM To Calibrate the Pitch Wheel To Calibrate Aftertouch using One or More KeysLow Velocity = 1 default X2 Menu Items Definitions MU Xboard ControlZone Xboard Control WindowDragging and Dropping Bank ViewChanging the Order of Patches Loading Bank or Patch FilesDesktop Basic OperationDevice Changing Settings Patch Modified IndicatorPatch Name Storing PatchesInitial Knob Settings Midi Controller Knob SettingsPatch Editor Tab Midi Channel CC TypeBasic Midi Channel Keyboard SettingsMidi Channel Number Per Control Pitch Wheel Settings Channel Control Mode CC NumberMod Wheel Settings Page Send Controller Values on Patch Recall Program Change per Midi ChannelVelocity Curve Select Zones Graphical Display Zones TabGlobal Zones Settings Zones SettingsController Range Individual Zones Settings Controller Range Menu Items BackupsPreferences DeviceLoad From File Loading and SavingSave Patch Save RevertRevert StoreView Menu Edit MenuDevice Menu Help MenuMidi Background AppendixMidi Channels & Continuous Controllers Midi Program Change Commands Footpedal WiringMidi Bank Select Commands FootpedalMidi Information Transmitted Recognized Remarks Midi Implementation ChartControl # Function Transmitted Recognized Remarks Midi Implementation Chart part 2 ControllersMidi Implementation Chart part 2 Controllers Nrpn LSB Nrpn MSB Appendix MU Systems Numerics IndexMidi Index