Creative E-MU manual MU Xboard Control, Definitions

Page 44

E-MU Xboard Control

E-MU XBOARD CONTROL

The E-MU Xboard Control software allows you to easily edit and then archive Xboard patches on your PC or Mac. All the features of the Xboard are logically displayed on a single page, which makes patch editing a breeze.

Xboard Control makes it easy to mix and match your favorite Xboard patches, then save or archive them on your host computer.

In addition, the Xboard Control allows you to program several other parameters, which are not accessible from the Xboard keyboard. The additional features are as follows:

•Xboard can send a different program change on any or all MIDI channels when a new Patch is selected.

•The MIDI channel and CC number can be set independently for each of the 16 controller knobs.

•The Pitch Wheels and Control Pedal can be reprogrammed to send any desired CC message.

•Knob controllers and Xboard patches and banks can be named with up to 16 characters.

Definitions

Active Patch	The “live” patch in the Xboard – the one that’s currently “in
	control”. Whenever you edit patch settings using the Xboard
	Control Patch Editor view or via the Xboard’s front panel, you’re
	editing the active patch. This patch usually starts out as a copy of
	one of the stored patches, but is itself only temporary -– it must
	be stored in order to retain any changes you make to patch
	settings, which are otherwise lost the next time a patch is
	recalled or the Xboard is switched off.
Bank	A set of 16 patches representing one complete memory dump
	from the Xboard.
Patch	One complete set of parameters for the Xboard.
Refresh	This function updates the Xboard Control application so that it
	holds current copies of the stored patches and the active patch in
	the Xboard. Refresh is not performed automatically, You must
	manually Refresh if you have made edits on the Xboard.
Store	The act of writing a patch into the Xboard non-volatile memory.

E-MU Systems

44

Image 44

Contents Xboard MU World Headquarters MU Systems Asia Pacific Africa, Middle EastEurope Japan Creative Media K. KTable of Contents Basic Operations Back Panel Description Powering the XboardXboard 61 Panel Controls Index MU Xboard ControlAppendix MU Systems Introduction Hardware Installation RequirementsOn a PC On a MacMidi Connection Connecting the Xboard to your ComputerUSB Connection Midi Interface MidiWindows Software InstallationMacintosh OS Windows XP Uninstalling all Audio Drivers and ApplicationsClick Start „ Settings „ Control Panel Troubleshooting To confirm the problem, do the followingLost Communication Wrong Driver in Windows XP or WindowsIntroduction Introduction Windows 2000 „ You may recover by doing the following Click Have DiskData Entry / Master Volume Slider Midi IndicatorsMain Panel Controls EditStore Patch EnterOctave Down Octave UpChannel Control Mode Latch ModeMidi Channel Select Knob BypassNormal mode Channel Controller mode3D Midi and Nrpn mode Controller KnobsZones Enable Xboard 61 Panel ControlsPatch Select / Numeric Keypad Keyboard Zones ButtonsUsing the Numeric Keypad Program Change ModeBack Panel Description Powering the Xboard Inserting Batteries into the XboardTo Insert Batteries This Side Not UsedTo Select a Patch Using the Main Panel Basic OperationsEntering Data Selecting and Storing PatchesTo Select a Patch Using Direct Patch Select Buttons Xboard Changing the Midi ChannelTo Store a Patch To Change the Midi ChannelChannel Control Mode Transposing the KeyboardChanging Controller CC Channel Numbers To Change Controller CC Channel NumbersTo Select 16 Channel Control Mode To Enable or Disable the Zones FunctionTo Enable or Disable a Specific Zone Working With ZonesLatch Mode, Zones Disabled To Select Latch ModeTo Set the Keyboard Range of Latched Notes Latch Mode, Zones EnabledSnap Shot To Edit a Setting Bypass ModeEditing Patch and Device Settings Editing Patch Device Settings Scrolling Text DisplayEdit Parameters PGM Send on RecallTo Send an External Program Change Xboard Send Program ChangeBank Sel MSB To Browse Midi Program Changes Program Change PGM Browse ModeBank Sel LSB CC Send On Recall Save CC Value in PatchTips for Use… Aftertouch On/OffSemitone Transpose Latch High/Low Note Velocity Curve SelectChannel CC Number To Select one of the X1 or X2 Functions X1 and X2 FunctionsX1 Menu Items CCM To Calibrate Aftertouch using One or More Keys To Calibrate the Pitch WheelLow Velocity = 1 default X2 Menu Items MU Xboard Control DefinitionsXboard Control Window ZoneBank View Dragging and DroppingChanging the Order of Patches Loading Bank or Patch FilesDevice Basic OperationDesktop Patch Modified Indicator Changing SettingsPatch Name Storing PatchesPatch Editor Tab Midi Controller Knob SettingsInitial Knob Settings CC Type Midi ChannelMidi Channel Number Per Control Keyboard SettingsBasic Midi Channel Mod Wheel Settings Channel Control Mode CC NumberPitch Wheel Settings Page Velocity Curve Select Program Change per Midi ChannelSend Controller Values on Patch Recall Zones Tab Zones Graphical DisplayZones Settings Global Zones SettingsController Range Individual Zones Settings Controller Range Backups Menu ItemsPreferences DeviceLoading and Saving Load From FileSave Patch Save RevertStore RevertEdit Menu View MenuDevice Menu Help MenuMidi Channels & Continuous Controllers AppendixMidi Background Footpedal Wiring Midi Program Change CommandsMidi Bank Select Commands FootpedalMidi Implementation Chart Midi Information Transmitted Recognized RemarksMidi Implementation Chart part 2 Controllers Control # Function Transmitted Recognized RemarksMidi Implementation Chart part 2 Controllers Nrpn LSB Nrpn MSB Appendix MU Systems Index NumericsMidi Index