Creative E-MU manual

Page 53

If this parameter is Off, the existing continuous controller settings are retained.

Xboard

Initial

Pedal Setting

CC Channel No

MIDI Channel

Octave / Semitone Transpose Settings

These settings allow you to transpose the keyboard up or down in octave or semitone steps. The octave transpose range is ±4 octaves. The semitone transpo- sition range is -64 to +63 semitones.

Note: Semitone Transpose is disabled when Zones are enabled.

Note Latch Mode Settings

This section allows you to program the high and low keys for latch mode, as described on page 29. You can also turn latch mode on or off by pressing the amber-colored button. Note that you cannot set a low key number higher than the high key, or a high key number lower than the low key.

Save Controller Values in Patch

When this parameter is set to On, the current initial value (position) settings of the 16 Controller Knobs, the Pitch Wheel, the Mod Wheel and the

Footpedal will be stored in the patch when the patch is stored via the Xboard front panel. Note that this setting has no effect upon storage of patches from Xboard Control, in which all settings are always stored to the Xboard exactly as they appear onscreen.

The Control Pedal input accepts either a momentary-on footswitch or a continuously variable pedal. Like the other controllers, an initial setting, CC number and MIDI channel can be programmed. The MIDI Channel field allows you to set the MIDI channel for the mod wheel. This field is unavailable unless the “MIDI Channel Number Per Control” option is selected (See

page 49.) The default setting for the Control Pedal is CC 64, which is the standard MIDI sustain pedal number.

E-MU Xboard Control

Pedal/Footswitch Settings

53

Image 53

Contents Xboard Asia Pacific Africa, Middle East MU World Headquarters MU SystemsEurope Japan Creative Media K. KTable of Contents Basic Operations Back Panel Description Powering the XboardXboard 61 Panel Controls Index MU Xboard ControlAppendix MU Systems Introduction Requirements Hardware InstallationOn a PC On a MacMidi Connection Connecting the Xboard to your ComputerUSB Connection Midi Midi InterfaceWindows Software InstallationMacintosh OS Windows XP Uninstalling all Audio Drivers and ApplicationsClick Start „ Settings „ Control Panel To confirm the problem, do the following TroubleshootingLost Communication Wrong Driver in Windows XP or WindowsIntroduction Introduction Click Have Disk Windows 2000 „ You may recover by doing the followingMidi Indicators Data Entry / Master Volume SliderMain Panel Controls EditEnter Store PatchOctave Down Octave UpLatch Mode Channel Control ModeMidi Channel Select Knob BypassChannel Controller mode Normal mode3D Midi and Nrpn mode Controller KnobsXboard 61 Panel Controls Zones EnablePatch Select / Numeric Keypad Keyboard Zones ButtonsProgram Change Mode Using the Numeric KeypadBack Panel Description Inserting Batteries into the Xboard Powering the XboardTo Insert Batteries This Side Not UsedBasic Operations To Select a Patch Using the Main PanelEntering Data Selecting and Storing PatchesChanging the Midi Channel To Select a Patch Using Direct Patch Select Buttons XboardTo Store a Patch To Change the Midi ChannelTransposing the Keyboard Channel Control ModeChanging Controller CC Channel Numbers To Change Controller CC Channel NumbersTo Enable or Disable the Zones Function To Select 16 Channel Control ModeTo Enable or Disable a Specific Zone Working With ZonesTo Select Latch Mode Latch Mode, Zones DisabledTo Set the Keyboard Range of Latched Notes Latch Mode, Zones EnabledSnap Shot To Edit a Setting Bypass ModeEditing Patch and Device Settings Scrolling Text Display Editing Patch Device SettingsPGM Send on Recall Edit ParametersTo Send an External Program Change Xboard Send Program ChangeBank Sel MSB To Browse Midi Program Changes Program Change PGM Browse ModeBank Sel LSB Save CC Value in Patch CC Send On RecallTips for Use… Aftertouch On/OffSemitone Transpose Latch High/Low Note Velocity Curve SelectChannel CC Number To Select one of the X1 or X2 Functions X1 and X2 FunctionsX1 Menu Items CCM To Calibrate the Pitch Wheel To Calibrate Aftertouch using One or More KeysLow Velocity = 1 default X2 Menu Items Definitions MU Xboard ControlZone Xboard Control WindowDragging and Dropping Bank ViewChanging the Order of Patches Loading Bank or Patch FilesDevice Basic OperationDesktop Changing Settings Patch Modified IndicatorPatch Name Storing PatchesPatch Editor Tab Midi Controller Knob SettingsInitial Knob Settings Midi Channel CC TypeMidi Channel Number Per Control Keyboard SettingsBasic Midi Channel Mod Wheel Settings Channel Control Mode CC NumberPitch Wheel Settings Page Velocity Curve Select Program Change per Midi ChannelSend Controller Values on Patch Recall Zones Graphical Display Zones TabGlobal Zones Settings Zones SettingsController Range Individual Zones Settings Controller Range Menu Items BackupsPreferences DeviceLoad From File Loading and SavingSave Patch Save RevertRevert StoreView Menu Edit MenuDevice Menu Help MenuMidi Channels & Continuous Controllers AppendixMidi Background Midi Program Change Commands Footpedal WiringMidi Bank Select Commands FootpedalMidi Information Transmitted Recognized Remarks Midi Implementation ChartControl # Function Transmitted Recognized Remarks Midi Implementation Chart part 2 ControllersMidi Implementation Chart part 2 Controllers Nrpn LSB Nrpn MSB Appendix MU Systems Numerics IndexMidi Index