Creative E-MU manual Bank Sel LSB, Program Change PGM Browse Mode, To Browse Midi Program Changes

Page 35

Basic Operations

Bank Sel LSB

This parameter allows you to select the MIDI Bank Select LSB (least significant byte) that will be used when sending program changes via the Send Prog Change, PGM Browse Mode or PGM Send On Recall features.

Select a Bank Select LSB from 0-127. Note that this merely edits the Bank Select LSB setting for the current MIDI channel in the active patch. It does not cause a MIDI message to be sent immediately. For more information on MIDI Bank Select commands, see page 65.

Program Change (PGM) Browse Mode

This function allows you to play the keyboard and use the wheels and rotary controls while browsing through MIDI programs. Program change messages are sent on the Basic MIDI channel as described above (See “Send Program Change” on page 34.). This includes sending Bank Select MSB and Bank Select LSB according to current settings for that MIDI channel in the active patch.

To Browse MIDI Program Changes:

1.Press the Edit button.

2.Press the PGM Browse Mode keyboard key. The display shows the current program change setting for the patch’s basic MIDI channel.

3.Select the desired program change number using the Data Slider or the Octave Transpose buttons. The program change numbers are shown on the display. (In order to avoid sending continuous barrages of program change messages which might confuse receiving equipment, program change messages are transmitted only when the slider stops moving for one second. The display will briefly show “---” whenever this occurs.) You can play the keyboard and use other performance controllers to audition the selected program.

4.Press Enter.

Press Home to leave the program change setting for the current MIDI channel unmodified in the active patch. The unmodified setting is used in one final program change message send to restore the previously-loaded program in any device which is receiving on that channel.

Xboard

35

Image 35

Contents Xboard Japan Creative Media K. K MU World Headquarters MU SystemsAsia Pacific Africa, Middle East EuropeTable of Contents Basic Operations Back Panel Description Powering the XboardXboard 61 Panel Controls Index MU Xboard ControlAppendix MU Systems Introduction On a Mac Hardware InstallationRequirements On a PCMidi Connection Connecting the Xboard to your ComputerUSB Connection Midi Midi InterfaceWindows Software InstallationMacintosh OS Windows XP Uninstalling all Audio Drivers and ApplicationsClick Start „ Settings „ Control Panel Wrong Driver in Windows XP or Windows TroubleshootingTo confirm the problem, do the following Lost CommunicationIntroduction Introduction Click Have Disk Windows 2000 „ You may recover by doing the followingEdit Data Entry / Master Volume SliderMidi Indicators Main Panel ControlsOctave Up Store PatchEnter Octave DownKnob Bypass Channel Control ModeLatch Mode Midi Channel SelectController Knobs Normal modeChannel Controller mode 3D Midi and Nrpn modeKeyboard Zones Buttons Zones EnableXboard 61 Panel Controls Patch Select / Numeric KeypadProgram Change Mode Using the Numeric KeypadBack Panel Description This Side Not Used Powering the XboardInserting Batteries into the Xboard To Insert BatteriesSelecting and Storing Patches To Select a Patch Using the Main PanelBasic Operations Entering DataTo Change the Midi Channel To Select a Patch Using Direct Patch Select Buttons XboardChanging the Midi Channel To Store a PatchTo Change Controller CC Channel Numbers Channel Control ModeTransposing the Keyboard Changing Controller CC Channel NumbersWorking With Zones To Select 16 Channel Control ModeTo Enable or Disable the Zones Function To Enable or Disable a Specific ZoneTo Select Latch Mode Latch Mode, Zones DisabledTo Set the Keyboard Range of Latched Notes Latch Mode, Zones EnabledSnap Shot To Edit a Setting Bypass ModeEditing Patch and Device Settings Scrolling Text Display Editing Patch Device SettingsPGM Send on Recall Edit ParametersTo Send an External Program Change Xboard Send Program ChangeBank Sel MSB To Browse Midi Program Changes Program Change PGM Browse ModeBank Sel LSB Save CC Value in Patch CC Send On RecallTips for Use… Aftertouch On/OffSemitone Transpose Latch High/Low Note Velocity Curve SelectChannel CC Number To Select one of the X1 or X2 Functions X1 and X2 FunctionsX1 Menu Items CCM To Calibrate the Pitch Wheel To Calibrate Aftertouch using One or More KeysLow Velocity = 1 default X2 Menu Items Definitions MU Xboard ControlZone Xboard Control WindowLoading Bank or Patch Files Bank ViewDragging and Dropping Changing the Order of PatchesDevice Basic OperationDesktop Storing Patches Patch Modified IndicatorChanging Settings Patch NamePatch Editor Tab Midi Controller Knob SettingsInitial Knob Settings Midi Channel CC TypeMidi Channel Number Per Control Keyboard SettingsBasic Midi Channel Mod Wheel Settings Channel Control Mode CC NumberPitch Wheel Settings Page Velocity Curve Select Program Change per Midi ChannelSend Controller Values on Patch Recall Zones Graphical Display Zones TabGlobal Zones Settings Zones SettingsController Range Individual Zones Settings Controller Range Device BackupsMenu Items PreferencesSave Revert Loading and SavingLoad From File Save PatchRevert StoreHelp Menu Edit MenuView Menu Device MenuMidi Channels & Continuous Controllers AppendixMidi Background Footpedal Footpedal WiringMidi Program Change Commands Midi Bank Select CommandsMidi Information Transmitted Recognized Remarks Midi Implementation ChartControl # Function Transmitted Recognized Remarks Midi Implementation Chart part 2 ControllersMidi Implementation Chart part 2 Controllers Nrpn LSB Nrpn MSB Appendix MU Systems Numerics IndexMidi Index