Pioneer SVM-1000 Manually entering the BPM using the TAP button, Using the visualizer, Parameter

Page 18

USING THE EFFECT FUNCTION

1Touch the [BPM AUTO/TAP] button to select the BPM (=Beat Per Minute) measurement mode.

AUTO: The BPM is automatically measured from the input music signal.

TAP: Tap the TAP button with your finger to manually input the BPM.

•Whenever power is first turned ON, [AUTO] is selected by default.

•The selected mode ([AUTO]/[TAP]) will appear in the display.

•When a BPM cannot be measured automatically, the BPM display in the display will flash.

•The measurement range of AUTO mode is BPM=70 to 180.

Depending on the track, the BPM may not be accurately measured. In these cases, use TAP mode to manually enter the BPM.

[Manually entering the BPM using the TAP button]

When the TAP button is tapped to the beat (a quarter note) more than twice, the average length will be set as the BPM.

•Pressing the TAP button during [AUTO] mode will switch the BPM measurement mode to [TAP], and the length between the taps will be measured.

•When a BPM is set using the TAP button, the multiplication factor will become [1/1] or [4/1] (depending on the effect), and the effect time will be set to either the length of 1 beat (a quarter note) or 4 beats.

•Rotate the TIME/PARAMETER dial while pressing the TAP button to set the BPM directly.

•Touch the [BPM AUTO/TAP] button to return to [AUTO] mode.

2Touch the effect category button [BEAT].

•The [BEAT] button will light brightly, and the icon will move as an animation.

•The BEAT effect screen will be displayed.

•Whenever power is first turned ON, the [BEAT] effect is selected by default.

3Use the effect select buttons to select an effect type.

•The selected button will appear white, and the icon will move as an animation.

•For a description of each effect, refer to P. 23.

4Use the CH SELECT dial to select the channel to which you wish to apply the effect.

•The selected effect channel display will appear white.

•If [MIC] is selected, the audio effect will be applied to both MIC 1 and MIC 2. There will be no effect on the video.

•When turning the power ON, [MASTER] will be selected.

5Touch the effect mode select button to select the effect mode.

•The selected button will appear white, and the icon will move as an animation.

A: The effect will be applied to the audio only.

AV: The effect will be applied to both the audio and video.

V:The effect will be applied to the video only.

• When turning the power ON, [AV] will be selected.

6Touch the beat button to choose the multiplication factor of the beat for synchronization of the effect.

•Select the beat number calculated from the BPM.

•The selected beat button will be highlighted.

•An effect time that corresponds to the multiplication factor of the beat will be automatically set.

[Example] When BPM=120 1/1 = 500 ms

1/2 = 250 ms 2/1 = 1000 ms

7Set the EFFECT ON/OFF button to ON to apply the effect.

•Each time the button is pressed it will switch between ON and OFF (whenever power is first turned ON, the setting defaults to OFF).

•When effect is ON, the button flashes.

Video effect pattern

Rotate the VIDEO FX PATTERN/TEXT BANK dial to select a video effect pattern for the selected video effect.

For descriptions on the video effect pattern change caused by

rotating the VIDEO FX PATTERN/TEXT BANK dial, refer to P. 24.

Parameter 1

Rotate the TIME/PARAMETER dial to adjust temporal parameters of the selected effect.

For descriptions on the changes in parameter 1 caused by turning the TIME/PARAMETER dial, refer to P. 23.

Parameter 2

Rotate the LEVEL/DEPTH dial to adjust quantitative parameters of the selected effect.

For descriptions on the changes in parameter 2 caused by rotating the LEVEL/DEPTH dial, refer to P. 23.

Using the visualizer

This function allows the use of images produced internally by the unit.

1Set [VISUALIZER] button to [ON].

The video effect monitor displays the image.

2Use the effect select buttons to choose a desired image.

3Use the CH SELECT dial to select the desired channel.

•The image will move automatically in rhythm to the music’s beat.

•In the event no input image is present, the visualizer’s image can be used.

18

En

Page 17 Page 19
Image 18
Page 17 Page 19
Contents SVM-1000 POWER-CORD Caution Ventilation CautionContents Confirm Features Accessories Digital sound/video system for high quality sound and imageChannnel Music and Video Synchromix Installing the SVM-1000 in an EIA rack Improved design and operability for new club cultureNames and Functions of Parts Connection PanelMaster COMPONENT, COMPOSITE, S-VIDEO Operation Panel Talk OverLine StereoPhono DigitalChannel fader curve switch CH Fader Curve Master level indicator Master L, RBooth Monitor level control dial Video EQ button ON/OFF, SET UPConnecting other line level output devices Connecting InputsConnecting an analog turntable ConnectionsConnecting Outputs External video connector Connecting Microphone and HeadphonesConnecting the Power Cord HeadphonesBasic Operations Selecting Stereo or Monaural Headphones OutputFader Curve Selection Microphone InputUsing the Video Control Functions Operating the Video Channel SwitchOperating the Video Cross Fader When Fader AV Sync is on Operating in the Video Solo ModeVideo MIX Effects Chart When Fader AV Sync is OFFWhen master monitor is on Using the Effect FunctionUsing Beat Effects When master monitor is offVideo effect pattern Manually entering the BPM using the TAP buttonUsing the visualizer ParameterPattern Using Touch EffectsWhen master monitor is off When master monitor is on Select an effect from the effect select buttonsUsing Text Effects Text BankText Edit Text bank Text BOX DISPLAYING/HIDING the Master MonitorUSB keyboard Caps /Parameter Description of the effect Beat button parameter Effect ListBeat effects *1 TIME/PARAMETER LEVEL/DEPTHOriginal Touch effects *1 Touched DescriptionShorter cycle length Sound Left to lower the pitch Effect. When dial is Rotated fully Spot Drop *3 Text effects CharacterTIME/PARAMETER Jpeg Viewer Setup Using the Jpeg ViewerBefore Using the Jpeg Viewer Using a USB memory deviceOperating in Auto Mode Using a Jpeg file by assigning it to a channelOperating in Manual Mode Loading Jpeg files to the SVM-1000Operating in Fader Mode Press the Clear button once again to leave this modeDeleting Jpeg files downloaded to the Jpeg BOX Turning the Equalizer ON/OFF SET UP the Video EQVideo Equalizer Function Touch ExitFader Start Function Using the Cross Fader to Start PlaybackUsing the Channel Fader to Start Playback Cross Fader Start Play and Back CUE PlayPerform Utility Setup Midi SettingsSet up Midi Fader CF Assign Video Trim Audio Trim CH2 MID LOW CUE BTN Midi Code ListMSB LSB Video Trim Audio Trim CH1 MID LOW CUE BTN Fader CF Assign Video Trim Audio Trim CH3 MID LOW CUE BTNMSB Booth Monitor AUTO/TAP BTNFLANGER, PHASER, Filter TAP BTNBeat Effect BTN Effect Text Effect BTN Category DelayPhaser BTN Touch Effect BTNZoom BTN Cross Fader Switch BTNRandom BTN Rotation BTNVideo monitor setup Perform Video Monitor SetupKeyboard Language Setup Keyboard language setupMIC Setting Hardware SetupSystem Settings Initiate hardware setupMaster OUT Settings Monitor OUT SettingsLCD Settings Ending Hardware SET UP Touch Panel SettingsReturning to Default Settings TOP PanelTroubleshooting Symptom Possible Cause RemedyDepth About the LCD Screen About Miniature Fluorescent Tube TechnologySpecifications OtherCustomer Support Division 800 782 Pioneer Electronics of Canada, IncPioneer Electronics USA, INC BOX 1760, Long Beach
Top Page Image Contents