Pioneer SVM-1000 Fader Start Function, Cross Fader Start Play and Back CUE Play

Page 35

FADER START FUNCTION

FADER START FUNCTION

By connecting the optional Pioneer DJ/VJ DVD Player or DJ CD Player control cable, the channel fader and cross fader can be used to start DVD/CD playback.

When the mixer’s channel fader lever or cross fader lever are moved, the DVD/CD player is released from the pause mode and automatically –and instantly – begins playback of the selected track. Also, when the fader lever is returned to its original position, the DVD/ CD player returns to its cue point (back cue), thus allowing “sampler” type play.

FADER

START

HI

CHANNEL

FADER

CROSS

FADER

ASSIGN

Using the Cross Fader to Start Playback

1

Press the FADER START button for the channel (1 to 4)

 

connected to the DVD/CD player you wish to control.

 

• The button for the selected channel lights.

2

Set the CROSS FADER ASSIGN switch for the selected channel

 

to [A] or [B].

 

• Select [A] to assign to cross fader channel A (left side).

 

• Select [B] to assign to cross fader channel B (right side).

3

Move the cross fader lever to the full opposite side away

 

from the DVD/CD player you wish to start.

4

Set the DVD/CD player to the desired cue point, and engage

 

cue point standby.

 

• If a cue point has already been set, it is not necessary to set

 

the DVD/CD player to standby at the cue point.

Cross fader lever (A/B)

CROSS FADER START PLAY AND BACK CUE PLAY

When the DVD/CD player assigned to cross fader channel A is set to standby at a cue point, moving the cross fader lever from the right (B) side toward the left (A) side automatically starts play on the channel A DVD/CD player.

When the cross fader lever reaches the left (A) side, the DVD/CD player assigned to channel B goes to back cue (returns to cue point). Also, when the DVD/CD player assigned to channel B is set to standby at a cue point, moving the cross fader lever from the left

(A)side to the right (B) side automatically starts playback on the channel B DVD/CD player. When the cross fader lever reaches the right (B) side, the DVD/CD player assigned to channel A goes to back cue (returns to cue point).

5 At the instant you wish to start playback, move the cross

fader lever (A/B).

• DVD/CD player begins playback.

• After playback has begun, if the cross fader lever is moved

fully to the opposite side, the DVD/CD player assigned to the

opposite side channel will return to the cue point and enter

standby mode (back cue).

Using the Channel Fader to Start Playback

1Press the FADER START button for the channel (1 to 4) connected to the DVD/CD player you wish to control.

•The button for the selected channel lights.

2Set the channel fader lever to [0].

3Set the DVD/CD player to the desired cue point, and engage cue point standby.

•If a cue point has already been set, it is not necessary to set the DVD/CD player to standby at the cue point.

4At the instant you wish to start playback, move the channel fader lever.

•DVD/CD player begins playback.

•After playback has begun, if the channel fader lever is

returned to the [0] position, the DVD/CD player returns to the cue point and re-enters standby mode (back cue).

•Playback control is possible with the channel fader only with the CROSS FADER ASSIGN switch is set to [THRU].

35

En

Page 34 Page 36
Image 35
Page 34 Page 36
Contents SVM-1000 Ventilation Caution POWER-CORD CautionContents Channnel Music and Video Synchromix Confirm Features AccessoriesDigital sound/video system for high quality sound and image Improved design and operability for new club culture Installing the SVM-1000 in an EIA rackMaster COMPONENT, COMPOSITE, S-VIDEO Names and Functions of PartsConnection Panel Talk Over Operation PanelDigital StereoPhono LineVideo EQ button ON/OFF, SET UP Master level indicator Master L, RBooth Monitor level control dial Channel fader curve switch CH Fader CurveConnections Connecting InputsConnecting an analog turntable Connecting other line level output devicesConnecting Outputs Headphones Connecting Microphone and HeadphonesConnecting the Power Cord External video connectorBasic Operations Microphone Input Headphones OutputFader Curve Selection Selecting Stereo or MonauralOperating the Video Cross Fader Using the Video Control FunctionsOperating the Video Channel Switch When Fader AV Sync is OFF Operating in the Video Solo ModeVideo MIX Effects Chart When Fader AV Sync is onWhen master monitor is off Using the Effect FunctionUsing Beat Effects When master monitor is onParameter Manually entering the BPM using the TAP buttonUsing the visualizer Video effect patternSelect an effect from the effect select buttons Using Touch EffectsWhen master monitor is off When master monitor is on PatternText Edit Using Text EffectsText Bank Text bank Caps / DISPLAYING/HIDING the Master MonitorUSB keyboard Text BOXTIME/PARAMETER LEVEL/DEPTH Effect ListBeat effects *1 Parameter Description of the effect Beat button parameterOriginal Touched Description Touch effects *1Shorter cycle length Sound Left to lower the pitch Effect. When dial is Rotated fully Spot Drop *3 TIME/PARAMETER Text effectsCharacter Using a USB memory device Using the Jpeg ViewerBefore Using the Jpeg Viewer Jpeg Viewer SetupLoading Jpeg files to the SVM-1000 Using a Jpeg file by assigning it to a channelOperating in Manual Mode Operating in Auto ModeDeleting Jpeg files downloaded to the Jpeg BOX Operating in Fader ModePress the Clear button once again to leave this mode Touch Exit SET UP the Video EQVideo Equalizer Function Turning the Equalizer ON/OFFCross Fader Start Play and Back CUE Play Using the Cross Fader to Start PlaybackUsing the Channel Fader to Start Playback Fader Start FunctionSet up Midi Perform Utility SetupMidi Settings Fader CF Assign Video Trim Audio Trim CH3 MID LOW CUE BTN Midi Code ListMSB LSB Video Trim Audio Trim CH1 MID LOW CUE BTN Fader CF Assign Video Trim Audio Trim CH2 MID LOW CUE BTNTAP BTN Booth Monitor AUTO/TAP BTNFLANGER, PHASER, Filter MSBTouch Effect BTN Effect Text Effect BTN Category DelayPhaser BTN Beat Effect BTNRotation BTN Cross Fader Switch BTNRandom BTN Zoom BTNKeyboard language setup Perform Video Monitor SetupKeyboard Language Setup Video monitor setupInitiate hardware setup Hardware SetupSystem Settings MIC SettingLCD Settings Master OUT SettingsMonitor OUT Settings TOP Panel Touch Panel SettingsReturning to Default Settings Ending Hardware SET UPDepth TroubleshootingSymptom Possible Cause Remedy About Miniature Fluorescent Tube Technology About the LCD ScreenOther SpecificationsBOX 1760, Long Beach 800 782 Pioneer Electronics of Canada, IncPioneer Electronics USA, INC Customer Support Division
Top Page Image Contents