Pioneer SVM-1000 About the LCD Screen, About Miniature Fluorescent Tube Technology

Page 46

TROUBLESHOOTING

Symptom

Possible Cause

Remedy

 

 

 

No video image, or image is

• VIDEO INPUT switch is set incorrectly.

• Set the VIDEO INPUT switch to select the

disrupted.

 

currently playing component.

 

• Connection cables are not connected properly,

• Connect correctly.

 

or are disconnected.

 

 

• Connectors or plugs are dirty.

• Clean away any dirt before connecting.

 

• Trim controls are set improperly.

• Adjust trim properly.

 

• Signal format of the input video source does not

• Select the hardware setup’s system settings to

 

match the system setting selected during

match the format of the video signal for the

 

hardware setup.

input/output video components.

 

• The TV monitor’s video signal format does not

 

 

match the system setting selected during

 

 

hardware setup.

 

 

• The TV monitor’s input selector is not set to the

• Set the TV monitor’s input selector to the type of

 

input type actually connected to the unit.

input connected to this unit.

 

• The TV monitor’s component setting is set to

• Set the TV monitor’s component setting to 525i

 

something besides 525i (interlaced).

interlaced).

 

 

 

The character pressed on the

• The keyboard connected to the USB connector

• Set the keyboard language setup to match the

keyboard is not entered.

does not match the setting selected during this

type of keyboard connected to the USB

 

unit’s keyboard language setup.

connector.

 

 

 

No response when touch panel

• Touch panel’s calibration is incorrect.

• Set calibration properly in hardware setup’s

is touched.

 

touch panel setting.

 

 

 

Static electricity or other external interference may cause the unit to malfunction. To restore normal operation, turn the power off and then on again.

ABOUT THE LCD SCREEN

•Some monitors may display so-called “hot pixels” or “dead

pixels” (constantly bright pixels or pixels that are permanently off). This is a phenomenon characteristic of such displays and is not considered a malfunction.

•When used in cold regions, the screen may appear dark for a while after the power is first turned on. As the unit warms up with time, the screen will return to normal brightness.

•Avoid exposing the monitor to direct sunlight, since reflected light may make the image difficult to view.

ABOUT MINIATURE FLUORESCENT TUBE

TECHNOLOGY

The LCD screen is illuminated by internal miniature fluorescent tube technology.

•Fluorescent tubes are rated for approximately 10 000 hours of use (lifetime may be shorter when the unit is used in cold regions).

•When a fluorescent tube reaches the end of its lifetime, the screen will become darker, making it difficult or impossible to see displayed images. In this event, consult your dealer or service center for repairs.

46

En

Page 45 Page 47
Image 46
Page 45 Page 47
Contents SVM-1000 POWER-CORD Caution Ventilation CautionContents Digital sound/video system for high quality sound and image Confirm Features AccessoriesChannnel Music and Video Synchromix Installing the SVM-1000 in an EIA rack Improved design and operability for new club cultureConnection Panel Names and Functions of PartsMaster COMPONENT, COMPOSITE, S-VIDEO Operation Panel Talk OverLine StereoPhono DigitalChannel fader curve switch CH Fader Curve Master level indicator Master L, RBooth Monitor level control dial Video EQ button ON/OFF, SET UPConnecting other line level output devices Connecting InputsConnecting an analog turntable ConnectionsConnecting Outputs External video connector Connecting Microphone and HeadphonesConnecting the Power Cord HeadphonesBasic Operations Selecting Stereo or Monaural Headphones OutputFader Curve Selection Microphone InputOperating the Video Channel Switch Using the Video Control FunctionsOperating the Video Cross Fader When Fader AV Sync is on Operating in the Video Solo ModeVideo MIX Effects Chart When Fader AV Sync is OFFWhen master monitor is on Using the Effect FunctionUsing Beat Effects When master monitor is offVideo effect pattern Manually entering the BPM using the TAP buttonUsing the visualizer ParameterPattern Using Touch EffectsWhen master monitor is off When master monitor is on Select an effect from the effect select buttonsText Bank Using Text EffectsText Edit Text bank Text BOX DISPLAYING/HIDING the Master MonitorUSB keyboard Caps /Parameter Description of the effect Beat button parameter Effect ListBeat effects *1 TIME/PARAMETER LEVEL/DEPTHOriginal Touch effects *1 Touched DescriptionShorter cycle length Sound Left to lower the pitch Effect. When dial is Rotated fully Spot Drop *3 Character Text effectsTIME/PARAMETER Jpeg Viewer Setup Using the Jpeg ViewerBefore Using the Jpeg Viewer Using a USB memory deviceOperating in Auto Mode Using a Jpeg file by assigning it to a channelOperating in Manual Mode Loading Jpeg files to the SVM-1000Press the Clear button once again to leave this mode Operating in Fader ModeDeleting Jpeg files downloaded to the Jpeg BOX Turning the Equalizer ON/OFF SET UP the Video EQVideo Equalizer Function Touch ExitFader Start Function Using the Cross Fader to Start PlaybackUsing the Channel Fader to Start Playback Cross Fader Start Play and Back CUE PlayMidi Settings Perform Utility SetupSet up Midi Fader CF Assign Video Trim Audio Trim CH2 MID LOW CUE BTN Midi Code ListMSB LSB Video Trim Audio Trim CH1 MID LOW CUE BTN Fader CF Assign Video Trim Audio Trim CH3 MID LOW CUE BTNMSB Booth Monitor AUTO/TAP BTNFLANGER, PHASER, Filter TAP BTNBeat Effect BTN Effect Text Effect BTN Category DelayPhaser BTN Touch Effect BTNZoom BTN Cross Fader Switch BTNRandom BTN Rotation BTNVideo monitor setup Perform Video Monitor SetupKeyboard Language Setup Keyboard language setupMIC Setting Hardware SetupSystem Settings Initiate hardware setupMonitor OUT Settings Master OUT SettingsLCD Settings Ending Hardware SET UP Touch Panel SettingsReturning to Default Settings TOP PanelSymptom Possible Cause Remedy TroubleshootingDepth About the LCD Screen About Miniature Fluorescent Tube TechnologySpecifications OtherCustomer Support Division 800 782 Pioneer Electronics of Canada, IncPioneer Electronics USA, INC BOX 1760, Long Beach
Top Page Image Contents