Pioneer SVM-1000 operating instructions Perform Utility Setup, Midi Settings, Set up Midi

Page 36

PERFORM UTILITY SETUP

PERFORM UTILITY SETUP

UTILITY

(SET UP)

HI

Set up MIDI

1Hold the UTILITY (SET UP) button depressed. The MIDI setup mode will be initiated.

2Touch [MIDI].

The MIDI setup screen will be displayed.

3Touch each applicable button.

Touch each applicable button on the screen to operate the MIDI setup.

4Touch [EXIT].

This will end the MIDI setup mode.

When power is turned OFF, all utility setup values other than MIDI CHANNEL and KEYBOARD LANGUAGE revert to their default values.

MIDI SETTINGS

MIDI is an acronym for “Musical Instrument Digital Interface” and refers to a protocol developed for the exchange of data between electronic instruments and computers.

A MIDI cable is used to connect components equipped with MIDI connectors to enable the transmission of data.

The SVM-1000 will use the MIDI function to send operational information for hardware and BPM (timing clock).

SYNCHRONIZING AUDIO SIGNALS TO EXTERNAL SEQUENCER, OR USING SVM-1000 INFORMATION TO OPERATE AN EXTERNAL SEQUENCER

1Connect the DIN connector to a MIDI sequencer, and the USB port to your computer.

This unit is equipped with both DIN type and USB type output connectors.

•Supported operating systems include Windows Vista, Windows XP or Mac OSX.

•For details regarding computer setup, refer to the

instruction manual for your computer and operating system. For application setup instructions, refer to the instruction manual for the application involved.

•Set the MIDI sequencer’s synch mode to “Slave”.

•MIDI sequencers that do not support MIDI timing clock cannot be synchronized.

•Synch may not be achieved if the track’s BPM cannot be detected and measured stably.

•BPM values set with the TAP mode can also be used to output the timing clock.

2Set the MIDI OUT to ON in the MIDI setup.

•The output range of the MIDI timing clock is 40 BPM to 250 BPM.

Note:

The BPM may not be measured correctly with some tracks.

MIDI OUT

Alternates MIDI signal output ON/OFF.

 

 

TIMING CLOCK

Switches the MIDI timing clock

SYNC.

synchronization between start and stop.

 

 

SNAP SHOT

Current MIDI information regarding dials

 

and buttons is transmitted.

 

 

BUTTON TYPE

Select the method in which the MIDI

 

signal is transmitted. Options include

 

toggle type and trigger type. In the trigger

 

type, any MIDI codes set to OFF will not be

 

sent, and MIDI codes set to ON will be

 

sent each time the button is pressed.

 

 

MIDI CHANNEL

Changes the MIDI channel. Configures

 

MIDI channels (1-16) and stores them in

 

memory.

 

 

Synchronize the computer application to the audio signals, or operate the computer application using the operation data for the SVM-1000.

1Connect the USB MIDI output connector of the SVM-1000 to your computer using the USB cable.

•Perform the MIDI settings for the application program. For further information, refer to the instruction manual for application program.

•Supported operating systems include Windows XP and Mac OSX.

36

En

Page 35 Page 37
Image 36
Page 35 Page 37
Contents SVM-1000 POWER-CORD Caution Ventilation CautionContents Confirm Features Accessories Digital sound/video system for high quality sound and imageChannnel Music and Video Synchromix Installing the SVM-1000 in an EIA rack Improved design and operability for new club cultureNames and Functions of Parts Connection PanelMaster COMPONENT, COMPOSITE, S-VIDEO Operation Panel Talk OverStereo PhonoLine DigitalMaster level indicator Master L, R Booth Monitor level control dialChannel fader curve switch CH Fader Curve Video EQ button ON/OFF, SET UPConnecting Inputs Connecting an analog turntableConnecting other line level output devices ConnectionsConnecting Outputs Connecting Microphone and Headphones Connecting the Power CordExternal video connector HeadphonesBasic Operations Headphones Output Fader Curve SelectionSelecting Stereo or Monaural Microphone InputUsing the Video Control Functions Operating the Video Channel SwitchOperating the Video Cross Fader Operating in the Video Solo Mode Video MIX Effects ChartWhen Fader AV Sync is on When Fader AV Sync is OFFUsing the Effect Function Using Beat EffectsWhen master monitor is on When master monitor is offManually entering the BPM using the TAP button Using the visualizerVideo effect pattern ParameterUsing Touch Effects When master monitor is off When master monitor is onPattern Select an effect from the effect select buttonsUsing Text Effects Text BankText Edit Text bank DISPLAYING/HIDING the Master Monitor USB keyboardText BOX Caps /Effect List Beat effects *1Parameter Description of the effect Beat button parameter TIME/PARAMETER LEVEL/DEPTHOriginal Touch effects *1 Touched DescriptionShorter cycle length Sound Left to lower the pitch Effect. When dial is Rotated fully Spot Drop *3 Text effects CharacterTIME/PARAMETER Using the Jpeg Viewer Before Using the Jpeg ViewerJpeg Viewer Setup Using a USB memory deviceUsing a Jpeg file by assigning it to a channel Operating in Manual ModeOperating in Auto Mode Loading Jpeg files to the SVM-1000Operating in Fader Mode Press the Clear button once again to leave this modeDeleting Jpeg files downloaded to the Jpeg BOX SET UP the Video EQ Video Equalizer FunctionTurning the Equalizer ON/OFF Touch ExitUsing the Cross Fader to Start Playback Using the Channel Fader to Start PlaybackFader Start Function Cross Fader Start Play and Back CUE PlayPerform Utility Setup Midi SettingsSet up Midi Midi Code List MSB LSB Video Trim Audio Trim CH1 MID LOW CUE BTNFader CF Assign Video Trim Audio Trim CH2 MID LOW CUE BTN Fader CF Assign Video Trim Audio Trim CH3 MID LOW CUE BTNBooth Monitor AUTO/TAP BTN FLANGER, PHASER, FilterMSB TAP BTNEffect Text Effect BTN Category Delay Phaser BTNBeat Effect BTN Touch Effect BTNCross Fader Switch BTN Random BTNZoom BTN Rotation BTNPerform Video Monitor Setup Keyboard Language SetupVideo monitor setup Keyboard language setupHardware Setup System SettingsMIC Setting Initiate hardware setupMaster OUT Settings Monitor OUT SettingsLCD Settings Touch Panel Settings Returning to Default SettingsEnding Hardware SET UP TOP PanelTroubleshooting Symptom Possible Cause RemedyDepth About the LCD Screen About Miniature Fluorescent Tube TechnologySpecifications Other800 782 Pioneer Electronics of Canada, Inc Pioneer Electronics USA, INCCustomer Support Division BOX 1760, Long Beach
Top Page Image Contents