Pioneer SVM-1000 Master level indicator Master L, R, Master balance dial Balance

Page 9

NAMES AND FUNCTIONS OF PARTS

35 Master level indicator (MASTER L, R)

These segment indicators display the audio output level from L and R channels. The indicators have a two-second peak hold.

36 Master balance dial (BALANCE)

Use to adjust the L/R channel balance for audio master output, booth monitor output, recording output, and digital output.

37 BOOTH MONITOR level control dial

This dial is used to adjust the booth monitor output volume. The volume can be adjusted independently of the master output level. (Adjustable range: –∞to 0 dB)

38 Channel fader curve switch (CH FADER CURVE)

This switch allows the user to select from three types of channel fader curve response.

The sound volume and video level changes as follows: This setting is applied equally to channels 1 to 4.

•At the left setting, the curve operates to produce a rapid rise as the channel fader approaches its distant position.

•At the right setting, the curve operates to produce an even, neutral rise throughout the channel fader’s movement.

•At the middle setting, an intermediate curve is produced, midway between the two curves noted above.

39SD CARD slot Insert an SD card.

40UTILITY button (MASTER MONITOR, SET UP)

Switches between display / no display of the master monitor on the LCD. When the master monitor is set to display, the indicator lights. When the button is held depressed, the indicator changes to flashing, and the LCD screen changes to show the utility setup menu.

41 VIDEO EQ button (ON/OFF, SET UP)

Switches the video equalizer ON/OFF. The indicator lights when the video equalizer is ON. When the button is held depressed, the indicator flashes, and the LCD display changes to show the equalizer setup menu.

42 JPEG VIEWER button

Use to set the JPEG viewer mode. The indicator lights when in the JPEG viewer mode.

43 VIDEO SOLO MODE button

Use to switch the video solo mode ON/OFF. When the video solo mode is ON, the indicator will flash.

44 Fader AV synchro button (FADER AV SYNC)

This button determines whether sound and video are controlled together, or independently. When set to ON, the indicator lights, and the channel fader and cross fader operations change both sound and video simultaneously. When set to OFF, the channel fader and cross fader levers control sound only, while video is controlled by the touch panel.

45 Effect channel selector dial (CH SELECT)

Use to select the channel to which effects are applied. When [MIC] is selected, effects are applied to both microphone 1 and microphone 2.

46 VIDEO FX PATTERN/TEXT BANK dial

Use to select video effects, video effect patterns and text banks.

47Effect parameter 1 dial (TIME/PARAMETER) Adjusts parameter for selected effect.

•If this dial is rotated while depressing the TAP button, direct BPM can be set manually.

48Effect parameter 2 dial (LEVEL/DEPTH) Adjusts quantitative parameters for selected effect.

49TAP button

The BPM is calculated from the intervals at which the TAP button is struck.

50Effect button/indicator (EFFECT ON/OFF) Turns selected effect ON/OFF.

When power is turned ON, the button lights (defaults to effect OFF). When effects are enabled (ON), the button flashes.

51 Cross fader lever (A/B)

This adjusts sound and video levels assigned to sides [A] and [B] in accordance with the CROSS FADER ASSIGN switches. When FADER AV SYNC is OFF, the control adjusts the sound only.

9

En

Page 8 Page 10
Image 9
Page 8 Page 10
Contents SVM-1000 Ventilation Caution POWER-CORD CautionContents Confirm Features Accessories Digital sound/video system for high quality sound and imageChannnel Music and Video Synchromix Improved design and operability for new club culture Installing the SVM-1000 in an EIA rackNames and Functions of Parts Connection PanelMaster COMPONENT, COMPOSITE, S-VIDEO Talk Over Operation PanelPhono StereoLine DigitalBooth Monitor level control dial Master level indicator Master L, RChannel fader curve switch CH Fader Curve Video EQ button ON/OFF, SET UPConnecting an analog turntable Connecting InputsConnecting other line level output devices ConnectionsConnecting Outputs Connecting the Power Cord Connecting Microphone and HeadphonesExternal video connector HeadphonesBasic Operations Fader Curve Selection Headphones OutputSelecting Stereo or Monaural Microphone InputUsing the Video Control Functions Operating the Video Channel SwitchOperating the Video Cross Fader Video MIX Effects Chart Operating in the Video Solo ModeWhen Fader AV Sync is on When Fader AV Sync is OFFUsing Beat Effects Using the Effect FunctionWhen master monitor is on When master monitor is offUsing the visualizer Manually entering the BPM using the TAP buttonVideo effect pattern ParameterWhen master monitor is off When master monitor is on Using Touch EffectsPattern Select an effect from the effect select buttonsUsing Text Effects Text BankText Edit Text bank USB keyboard DISPLAYING/HIDING the Master MonitorText BOX Caps /Beat effects *1 Effect ListParameter Description of the effect Beat button parameter TIME/PARAMETER LEVEL/DEPTHOriginal Touched Description Touch effects *1Shorter cycle length Sound Left to lower the pitch Effect. When dial is Rotated fully Spot Drop *3 Text effects CharacterTIME/PARAMETER Before Using the Jpeg Viewer Using the Jpeg ViewerJpeg Viewer Setup Using a USB memory deviceOperating in Manual Mode Using a Jpeg file by assigning it to a channelOperating in Auto Mode Loading Jpeg files to the SVM-1000Operating in Fader Mode Press the Clear button once again to leave this modeDeleting Jpeg files downloaded to the Jpeg BOX Video Equalizer Function SET UP the Video EQTurning the Equalizer ON/OFF Touch ExitUsing the Channel Fader to Start Playback Using the Cross Fader to Start PlaybackFader Start Function Cross Fader Start Play and Back CUE PlayPerform Utility Setup Midi SettingsSet up Midi MSB LSB Video Trim Audio Trim CH1 MID LOW CUE BTN Midi Code ListFader CF Assign Video Trim Audio Trim CH2 MID LOW CUE BTN Fader CF Assign Video Trim Audio Trim CH3 MID LOW CUE BTNFLANGER, PHASER, Filter Booth Monitor AUTO/TAP BTNMSB TAP BTNPhaser BTN Effect Text Effect BTN Category DelayBeat Effect BTN Touch Effect BTNRandom BTN Cross Fader Switch BTNZoom BTN Rotation BTNKeyboard Language Setup Perform Video Monitor SetupVideo monitor setup Keyboard language setupSystem Settings Hardware SetupMIC Setting Initiate hardware setupMaster OUT Settings Monitor OUT SettingsLCD Settings Returning to Default Settings Touch Panel SettingsEnding Hardware SET UP TOP PanelTroubleshooting Symptom Possible Cause RemedyDepth About Miniature Fluorescent Tube Technology About the LCD ScreenOther SpecificationsPioneer Electronics USA, INC 800 782 Pioneer Electronics of Canada, IncCustomer Support Division BOX 1760, Long Beach
Top Page Image Contents