Pioneer SVM-1000 Hardware Setup, System Settings, MIC Setting, Initiate hardware setup

Page 42

HARDWARE SETUP

HARDWARE SETUP

POWER

UTILITY

(SET UP)

HI

SYSTEM SETTINGS

1Touch [SYSTEM].

The SYSTEM setting screen will be displayed.

2Choose settings by touching [] or [].

The hardware setup values are preserved even when power is turned OFF.

Initiate hardware setup

1Turn the POWER switch on while pressing the UTILITY (SET UP) button.

Continue depressing the UTILITY (SET UP) button while the logo mark [PIONEER PRO DJ] is displayed.

The hardware setup screen will be displayed.

MIC SETTING

1Touch [MIC]

The MIC setting screen will be displayed.

2Choose settings by touching [] or [].

VIDEO SYSTEM

Selects the video signal format. When

 

used in North America, it should be set to

 

NTSC (7.5 IRE).

 

 

DIGITAL OUT MAX

Selects the maximum level of the digital

LEVEL

out circuit.

 

 

3Touch [SAVE] to save the settings.

The settings will not be implemented unless [SAVE] is touched.

OUTPUT TO

Set whether or not to output the audio

BOOTH MONITOR

from the MIC to the booth monitor.

 

 

TALK OVER

Adjust the sensitivity of talk over.

THRESHOLD LEVEL

 

 

 

TALK OVER LEVEL

Adjust the level of talk over.

 

 

3Touch [SAVE] to save the settings.

The settings will not be implemented unless [SAVE] is touched.

42

En

Image 42
Contents SVM-1000 POWER-CORD Caution Ventilation CautionContents Confirm Features Accessories Digital sound/video system for high quality sound and imageChannnel Music and Video Synchromix Installing the SVM-1000 in an EIA rack Improved design and operability for new club cultureNames and Functions of Parts Connection PanelMaster COMPONENT, COMPOSITE, S-VIDEO Operation Panel Talk OverLine StereoPhono DigitalChannel fader curve switch CH Fader Curve Master level indicator Master L, RBooth Monitor level control dial Video EQ button ON/OFF, SET UPConnecting other line level output devices Connecting InputsConnecting an analog turntable ConnectionsConnecting Outputs External video connector Connecting Microphone and HeadphonesConnecting the Power Cord HeadphonesBasic Operations Selecting Stereo or Monaural Headphones OutputFader Curve Selection Microphone InputUsing the Video Control Functions Operating the Video Channel SwitchOperating the Video Cross Fader When Fader AV Sync is on Operating in the Video Solo ModeVideo MIX Effects Chart When Fader AV Sync is OFFWhen master monitor is on Using the Effect FunctionUsing Beat Effects When master monitor is offVideo effect pattern Manually entering the BPM using the TAP buttonUsing the visualizer ParameterPattern Using Touch EffectsWhen master monitor is off When master monitor is on Select an effect from the effect select buttonsUsing Text Effects Text BankText Edit Text bank Text BOX DISPLAYING/HIDING the Master MonitorUSB keyboard Caps /Parameter Description of the effect Beat button parameter Effect ListBeat effects *1 TIME/PARAMETER LEVEL/DEPTHOriginal Touch effects *1 Touched DescriptionShorter cycle length Sound Left to lower the pitch Effect. When dial is Rotated fully Spot Drop *3 Text effects CharacterTIME/PARAMETER Jpeg Viewer Setup Using the Jpeg ViewerBefore Using the Jpeg Viewer Using a USB memory deviceOperating in Auto Mode Using a Jpeg file by assigning it to a channelOperating in Manual Mode Loading Jpeg files to the SVM-1000Operating in Fader Mode Press the Clear button once again to leave this modeDeleting Jpeg files downloaded to the Jpeg BOX Turning the Equalizer ON/OFF SET UP the Video EQVideo Equalizer Function Touch ExitFader Start Function Using the Cross Fader to Start PlaybackUsing the Channel Fader to Start Playback Cross Fader Start Play and Back CUE PlayPerform Utility Setup Midi SettingsSet up Midi Fader CF Assign Video Trim Audio Trim CH2 MID LOW CUE BTN Midi Code ListMSB LSB Video Trim Audio Trim CH1 MID LOW CUE BTN Fader CF Assign Video Trim Audio Trim CH3 MID LOW CUE BTNMSB Booth Monitor AUTO/TAP BTNFLANGER, PHASER, Filter TAP BTNBeat Effect BTN Effect Text Effect BTN Category DelayPhaser BTN Touch Effect BTNZoom BTN Cross Fader Switch BTNRandom BTN Rotation BTNVideo monitor setup Perform Video Monitor SetupKeyboard Language Setup Keyboard language setupMIC Setting Hardware SetupSystem Settings Initiate hardware setupMaster OUT Settings Monitor OUT SettingsLCD Settings Ending Hardware SET UP Touch Panel SettingsReturning to Default Settings TOP PanelTroubleshooting Symptom Possible Cause RemedyDepth About the LCD Screen About Miniature Fluorescent Tube TechnologySpecifications OtherCustomer Support Division 800 782 Pioneer Electronics of Canada, IncPioneer Electronics USA, INC BOX 1760, Long Beach