Pioneer SVM-1000 operating instructions Text bank

Page 21

USING THE EFFECT FUNCTION

7Touch the beat button to choose the multiplication factor of the beat for synchronization of the effect.

•Select the beat number calculated from the BPM.

•The selected beat button will be highlighted.

•An effect time that corresponds to the multiplication factor of the beat will be automatically set.

[Example] When BPM=120 1/1 = 500 ms

1/2 = 250 ms 2/1 = 1000 ms

8Set the effect EFFECT ON/OFF button to ON to apply the effect.

•Each time the button is pressed it will switch between ON and OFF (whenever power is first turned ON, the setting defaults to OFF).

•When effect is ON, the button is flashes.

Text bank

Rotate the VIDEO FX PATTERN/TEXT BANK dial to select a TEXT

BANK.

Parameter 1

Rotate the TIME/PARAMETER dial to adjust temporal parameters of the selected effect.

For descriptions on the changes in parameter 1 caused by rotating the TIME/PARAMETER dial, refer to P. 30.

Parameter 2

Rotate the LEVEL/DEPTH dial to adjust quantitative parameters of the selected effect.

For descriptions on the changes in parameter 2 caused by rotating the LEVEL/DEPTH dial, refer to P. 30.

21

En

Image 21

Contents SVM-1000 Ventilation Caution POWER-CORD CautionContents Confirm Features Accessories Digital sound/video system for high quality sound and imageChannnel Music and Video Synchromix Improved design and operability for new club culture Installing the SVM-1000 in an EIA rackNames and Functions of Parts Connection PanelMaster COMPONENT, COMPOSITE, S-VIDEO Talk Over Operation PanelPhono StereoLine DigitalBooth Monitor level control dial Master level indicator Master L, RChannel fader curve switch CH Fader Curve Video EQ button ON/OFF, SET UPConnecting an analog turntable Connecting InputsConnecting other line level output devices ConnectionsConnecting Outputs Connecting the Power Cord Connecting Microphone and HeadphonesExternal video connector HeadphonesBasic Operations Fader Curve Selection Headphones OutputSelecting Stereo or Monaural Microphone InputUsing the Video Control Functions Operating the Video Channel SwitchOperating the Video Cross Fader Video MIX Effects Chart Operating in the Video Solo ModeWhen Fader AV Sync is on When Fader AV Sync is OFFUsing Beat Effects Using the Effect FunctionWhen master monitor is on When master monitor is offUsing the visualizer Manually entering the BPM using the TAP buttonVideo effect pattern ParameterWhen master monitor is off When master monitor is on Using Touch EffectsPattern Select an effect from the effect select buttonsUsing Text Effects Text BankText Edit Text bank USB keyboard DISPLAYING/HIDING the Master MonitorText BOX Caps /Beat effects *1 Effect ListParameter Description of the effect Beat button parameter TIME/PARAMETER LEVEL/DEPTHOriginal Touched Description Touch effects *1Shorter cycle length Sound Left to lower the pitch Effect. When dial is Rotated fully Spot Drop *3 Text effects CharacterTIME/PARAMETER Before Using the Jpeg Viewer Using the Jpeg ViewerJpeg Viewer Setup Using a USB memory deviceOperating in Manual Mode Using a Jpeg file by assigning it to a channelOperating in Auto Mode Loading Jpeg files to the SVM-1000Operating in Fader Mode Press the Clear button once again to leave this modeDeleting Jpeg files downloaded to the Jpeg BOX Video Equalizer Function SET UP the Video EQTurning the Equalizer ON/OFF Touch ExitUsing the Channel Fader to Start Playback Using the Cross Fader to Start PlaybackFader Start Function Cross Fader Start Play and Back CUE PlayPerform Utility Setup Midi SettingsSet up Midi MSB LSB Video Trim Audio Trim CH1 MID LOW CUE BTN Midi Code ListFader CF Assign Video Trim Audio Trim CH2 MID LOW CUE BTN Fader CF Assign Video Trim Audio Trim CH3 MID LOW CUE BTNFLANGER, PHASER, Filter Booth Monitor AUTO/TAP BTNMSB TAP BTNPhaser BTN Effect Text Effect BTN Category DelayBeat Effect BTN Touch Effect BTNRandom BTN Cross Fader Switch BTNZoom BTN Rotation BTNKeyboard Language Setup Perform Video Monitor SetupVideo monitor setup Keyboard language setupSystem Settings Hardware SetupMIC Setting Initiate hardware setupMaster OUT Settings Monitor OUT SettingsLCD Settings Returning to Default Settings Touch Panel SettingsEnding Hardware SET UP TOP PanelTroubleshooting Symptom Possible Cause RemedyDepth About Miniature Fluorescent Tube Technology About the LCD ScreenOther SpecificationsPioneer Electronics USA, INC 800 782 Pioneer Electronics of Canada, IncCustomer Support Division BOX 1760, Long Beach