Pioneer SVM-1000 Before Using the Jpeg Viewer, Jpeg Viewer Setup, Using a USB memory device

Page 31

USING THE JPEG VIEWER

USING THE JPEG VIEWER

JPEG files can be loaded and displayed from USB memory devices and SD cards. Up to eight JPEG files can be loaded.

USB

HI

JPEG

VIEWER

SD

CARD

CARD indicator

BEFORE USING THE JPEG VIEWER

Insert a USB memory device or SD card into this mixer.

Using a USB memory device

Insert a USB memory device containing JPEG files to the USB connector. Only USB memory devices formatted in FAT32 format can be used.

Using a SD card

Insert a SD card containing JPEG files into the SD CARD slot.

•The memory card used must be formatted according to “SD Memory Card Specifications Part2 FILE SYSTEM SPECIFICATION Version1.0” (SD memory cards are formatted in the aforementioned standard upon shipping from their manufacturers). Unformatted memory cards cannot be used.

•Memory cards formatted on computers or digital cameras may not operate properly.

•Multi-media cards (MMC) cannot be used.

•Do not remove the card or turn the power off while the CARD indicator is blinking (doing so may result in damage to the stored data).

•Memory cards are delicate electronic devices. Do not bend them, subject them to strong shocks or impacts. Additionally, do not use or store memory cards in environments likely to create static electricity or electrical noise.

•Memory cards may be damaged when exposed to impacts or static electricity. Handle them with care. It is strongly suggested that you periodically make copies of important data.

•Pioneer will not be held responsible for any loss of data or direct/ indirect damages.

JPEG VIEWER SETUP

1Press the JPEG VIEWER button.

The JPEG play mode screen will appear.

9	7
1
2	4
3
	8
5

6

1	[MANUAL	Sets the JPEG play mode to MANUAL.
	MODE] button

2	[AUTO MODE]	Sets the JPEG play mode to AUTO.
	button

3	[FADER MODE]	Sets the JPEG play mode to FADER.
	button

4	[TIME] display/	When in AUTO mode, sets the time for
	Change buttons	changing the JPEG images.

5	[JPEG BOX]	Selects the JPEG images that are to be
		assigned to the channels.

6	Channel select	Sets the channel to which JPEG images
	buttons	are to be assigned.
		Alternatively use to cancel the assigned
		JPEG.

7	[JPEG SELECT]	Enables JPEG select mode.
	button	If operated when effects are ON, a
		warning message will appear and the
		screen will not change to the next menu.

8	[CLEAR] button	Alternates JPEG BOX clear mode ON/
		OFF.

9	[EXIT] button	Exits JPEG viewer setup.

31

En

Image 31

Contents SVM-1000 Ventilation Caution POWER-CORD CautionContents Digital sound/video system for high quality sound and image Confirm Features AccessoriesChannnel Music and Video Synchromix Improved design and operability for new club culture Installing the SVM-1000 in an EIA rackConnection Panel Names and Functions of PartsMaster COMPONENT, COMPOSITE, S-VIDEO Talk Over Operation PanelDigital StereoPhono LineVideo EQ button ON/OFF, SET UP Master level indicator Master L, RBooth Monitor level control dial Channel fader curve switch CH Fader CurveConnections Connecting InputsConnecting an analog turntable Connecting other line level output devicesConnecting Outputs Headphones Connecting Microphone and HeadphonesConnecting the Power Cord External video connectorBasic Operations Microphone Input Headphones OutputFader Curve Selection Selecting Stereo or MonauralOperating the Video Channel Switch Using the Video Control FunctionsOperating the Video Cross Fader When Fader AV Sync is OFF Operating in the Video Solo ModeVideo MIX Effects Chart When Fader AV Sync is onWhen master monitor is off Using the Effect FunctionUsing Beat Effects When master monitor is onParameter Manually entering the BPM using the TAP buttonUsing the visualizer Video effect patternSelect an effect from the effect select buttons Using Touch EffectsWhen master monitor is off When master monitor is on PatternText Bank Using Text EffectsText Edit Text bank Caps / DISPLAYING/HIDING the Master MonitorUSB keyboard Text BOXTIME/PARAMETER LEVEL/DEPTH Effect ListBeat effects *1 Parameter Description of the effect Beat button parameterOriginal Touched Description Touch effects *1Shorter cycle length Sound Left to lower the pitch Effect. When dial is Rotated fully Spot Drop *3 Character Text effectsTIME/PARAMETER Using a USB memory device Using the Jpeg ViewerBefore Using the Jpeg Viewer Jpeg Viewer SetupLoading Jpeg files to the SVM-1000 Using a Jpeg file by assigning it to a channelOperating in Manual Mode Operating in Auto ModePress the Clear button once again to leave this mode Operating in Fader ModeDeleting Jpeg files downloaded to the Jpeg BOX Touch Exit SET UP the Video EQVideo Equalizer Function Turning the Equalizer ON/OFFCross Fader Start Play and Back CUE Play Using the Cross Fader to Start PlaybackUsing the Channel Fader to Start Playback Fader Start FunctionMidi Settings Perform Utility SetupSet up Midi Fader CF Assign Video Trim Audio Trim CH3 MID LOW CUE BTN Midi Code ListMSB LSB Video Trim Audio Trim CH1 MID LOW CUE BTN Fader CF Assign Video Trim Audio Trim CH2 MID LOW CUE BTNTAP BTN Booth Monitor AUTO/TAP BTNFLANGER, PHASER, Filter MSBTouch Effect BTN Effect Text Effect BTN Category DelayPhaser BTN Beat Effect BTNRotation BTN Cross Fader Switch BTNRandom BTN Zoom BTNKeyboard language setup Perform Video Monitor SetupKeyboard Language Setup Video monitor setupInitiate hardware setup Hardware SetupSystem Settings MIC SettingMonitor OUT Settings Master OUT SettingsLCD Settings TOP Panel Touch Panel SettingsReturning to Default Settings Ending Hardware SET UPSymptom Possible Cause Remedy TroubleshootingDepth About Miniature Fluorescent Tube Technology About the LCD ScreenOther SpecificationsBOX 1760, Long Beach 800 782 Pioneer Electronics of Canada, IncPioneer Electronics USA, INC Customer Support Division