USING THE EFFECT FUNCTION
USING TOUCH EFFECTS
With TOUCH effects, many effects can be created by touching the video EFFECT performance monitor.
When master monitor is off
1 |
|
6 | 7 |
2 | 4 |
| |
3 | 5 |
When master monitor is on
| 1 |
|
|
|
|
| 4 |
|
|
|
|
|
| ||
| 2 |
|
|
| 32 |
| |
|
|
|
|
| |||
|
|
|
|
| 5 | ||
|
|
|
|
| |||
| 6 |
|
|
|
|
| |
|
|
|
|
| |||
|
|
|
|
|
| 7 | |
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
1 | Effect select | Select and touch the desired effect button | |||||
| buttons | from the 12 TOUCH effects. | |||||
|
|
|
|
|
|
|
|
2 | Effect mode | A: Touch to apply the effect to audio only. | |||||
| select buttons | AV: Touch to apply the effect to both | |||||
|
|
|
|
| audio and video. | ||
|
|
|
|
| V: Touch to apply the effect to video only. | ||
|
|
|
|
|
|
|
|
3 | Video EFFECT | Touch here to apply effects to the video | |||||
| performance | image. | |||||
| monitor |
|
|
| |||
|
|
|
|
|
|
|
|
4 | Video effect | Rotate the VIDEO FX PATTERN/TEXT | |||||
| pattern display | BANK dial to select the video effect | |||||
|
|
|
|
| pattern. The pattern will differ depending | ||
|
|
|
|
| on the effect type. | ||
|
|
|
|
|
|
|
|
5 | Parameter | Displays the TOUCH effect parameter. | |||||
| display | The parameter will differ depending on | |||||
|
|
|
|
| the effect type | ||
|
|
|
|
|
|
|
|
6[HOLD] button When [HOLD] button is set to [ON], effects are recorded from the time the screen is touched until the finger is removed.
7[VISUALIZER] Internally creates a video image to which
button | TOUCH effects can be applied. |
1Touch the effect category button [TOUCH].
•The [TOUCH] button will light brightly, and the icon will move as an animation.
•The TOUCH effect screen will be displayed.
2Select an effect from the effect select buttons.
•The selected button will appear white, and the icon will move as an animation.
•For a description of each effect, refer to P. 25.
3Use the CH SELECT dial to select the channel to which you wish to apply the effect.
•The selected effect channel display will appear white.
•If [MIC] is selected, the audio effect will be applied to both MIC 1 and MIC 2. There will be no effect on the video.
4Touch the effect mode select button to select the effect mode.
•The selected button will appear white, and the icon will move as an animation.
A:The effect will be applied to the audio only.
AV: The effect will be applied to both the audio and video.
V:The effect will be applied to the video only.
• When turning the power ON, [AV] will be selected.
5Set the EFFECT ON/OFF button to ON to apply the effect.
•Each time the button is pressed it will switch between ON and OFF (whenever power is first turned ON, the setting defaults to OFF).
•When effect is ON, the button flashes.
6Touch the video effect performance monitor to change the effects.
•When [HOLD] button is set to [ON], effects are recorded from the time the screen is touched until the finger is removed (max. 8 sec.), then output repeatedly.
•Each time the [HOLD] button is touched it will switch between [ON] and [OFF].
•Whenever power is first turned ON, the setting defaults to [OFF].
Pattern
Rotate the VIDEO FX PATTERN/TEXT BANK dial to select a video effect pattern of the selected video effect.
For descriptions of the video pattern changes caused by rotating
the VIDEO FX PATTERN/TEXT BANK dial, refer to P. 25.
Parameter 1
Rotate the TIME/PARAMETER dial to adjust the parameters for the selected effect.
For descriptions on the changes in parameter 1 caused by rotating the TIME/PARAMETER dial, refer to P. 25.
Parameter 2
Rotate the LEVEL/DEPTH dial to adjust the quantitative parameters for the selected effect.
For descriptions on the changes in parameter 2 caused by rotating the LEVEL/DEPTH dial, refer to P. 25.
Using the Visualizer
This function allows the use of images produced internally by the unit.
1Set [VISUALIZER] button to [ON].
The video effect performance monitor displays the image.
19
En