Pioneer SVM-1000 operating instructions Basic Operations

Page 13

BASIC OPERATIONS

BASIC OPERATIONS

POWER

VIDEO	VIDEO MASTER LEVEL
INPUT	VIDEO TRIM
AUDIO	AUDIO MASTER LEVEL
AUDIO
INPUT	AUDIO TRIM
	HI
HI, MID,	HI, MID,
LOW	LOW
Channel fader
lever
	BALANCE
CROSS FADER
ASSIGN	Cross fader lever
	(A/B)

1Set rear panel POWER switch to [ON].

2Set the AUDIO INPUT switch for the desired channel to match the type of connected component.

•When using the DVD input, set to [DVD].

•When using LINE input, set to [LINE].

•When using DVD/LINE input, set to [DVD/LINE].

•When using DIGITAL input, set to [DIGITAL].

•When using PHONO input, set to [PHONO].

3Use the VIDEO INPUT switch for the selected channel to choose the video input.

4Use the AUDIO TRIM dial to adjust the input level for each channel.

5Use the VIDEO TRIM dial to adjust the input level for each channel.

6Use the channel equalizer dials (HI, MID, LOW) to adjust the tone.

7Use the channel fader lever to adjust the sound volume of the selected channel.

8To use the cross fader on the selected channel, set the CROSS FADER ASSIGN switch to either cross fader channel A or channel B, and operate the cross fader lever (A/B).

•When not using the cross fader, set the CROSS FADER ASSIGN switch to [THRU].

9Use the AUDIO MASTER LEVEL dial to adjust the overall sound volume.

10Use the VIDEO MASTER LEVEL dial to adjust the overall luminance level.

11Use the BALANCE dial to adjust the sound balance between right and left.

13

En

Image 13

Contents SVM-1000 Ventilation Caution POWER-CORD CautionContents Digital sound/video system for high quality sound and image Confirm Features AccessoriesChannnel Music and Video Synchromix Improved design and operability for new club culture Installing the SVM-1000 in an EIA rackConnection Panel Names and Functions of PartsMaster COMPONENT, COMPOSITE, S-VIDEO Talk Over Operation PanelPhono StereoLine DigitalBooth Monitor level control dial Master level indicator Master L, RChannel fader curve switch CH Fader Curve Video EQ button ON/OFF, SET UPConnecting an analog turntable Connecting InputsConnecting other line level output devices ConnectionsConnecting Outputs Connecting the Power Cord Connecting Microphone and HeadphonesExternal video connector HeadphonesBasic Operations Fader Curve Selection Headphones OutputSelecting Stereo or Monaural Microphone InputOperating the Video Channel Switch Using the Video Control FunctionsOperating the Video Cross Fader Video MIX Effects Chart Operating in the Video Solo ModeWhen Fader AV Sync is on When Fader AV Sync is OFFUsing Beat Effects Using the Effect FunctionWhen master monitor is on When master monitor is offUsing the visualizer Manually entering the BPM using the TAP buttonVideo effect pattern ParameterWhen master monitor is off When master monitor is on Using Touch EffectsPattern Select an effect from the effect select buttonsText Bank Using Text EffectsText Edit Text bank USB keyboard DISPLAYING/HIDING the Master MonitorText BOX Caps /Beat effects *1 Effect ListParameter Description of the effect Beat button parameter TIME/PARAMETER LEVEL/DEPTHOriginal Touched Description Touch effects *1Shorter cycle length Sound Left to lower the pitch Effect. When dial is Rotated fully Spot Drop *3 Character Text effectsTIME/PARAMETER Before Using the Jpeg Viewer Using the Jpeg ViewerJpeg Viewer Setup Using a USB memory deviceOperating in Manual Mode Using a Jpeg file by assigning it to a channelOperating in Auto Mode Loading Jpeg files to the SVM-1000Press the Clear button once again to leave this mode Operating in Fader ModeDeleting Jpeg files downloaded to the Jpeg BOX Video Equalizer Function SET UP the Video EQTurning the Equalizer ON/OFF Touch ExitUsing the Channel Fader to Start Playback Using the Cross Fader to Start PlaybackFader Start Function Cross Fader Start Play and Back CUE PlayMidi Settings Perform Utility SetupSet up Midi MSB LSB Video Trim Audio Trim CH1 MID LOW CUE BTN Midi Code ListFader CF Assign Video Trim Audio Trim CH2 MID LOW CUE BTN Fader CF Assign Video Trim Audio Trim CH3 MID LOW CUE BTNFLANGER, PHASER, Filter Booth Monitor AUTO/TAP BTNMSB TAP BTNPhaser BTN Effect Text Effect BTN Category DelayBeat Effect BTN Touch Effect BTNRandom BTN Cross Fader Switch BTNZoom BTN Rotation BTNKeyboard Language Setup Perform Video Monitor SetupVideo monitor setup Keyboard language setupSystem Settings Hardware SetupMIC Setting Initiate hardware setupMonitor OUT Settings Master OUT SettingsLCD Settings Returning to Default Settings Touch Panel SettingsEnding Hardware SET UP TOP PanelSymptom Possible Cause Remedy TroubleshootingDepth About Miniature Fluorescent Tube Technology About the LCD ScreenOther SpecificationsPioneer Electronics USA, INC 800 782 Pioneer Electronics of Canada, IncCustomer Support Division BOX 1760, Long Beach