Section 5 |
| Installation Wiring |
| ||
|
|
|
Meters and Phasescope
The Centre Section of the C100 console may optionally be fitted with an LCD phasescope and/or twin moving- coil mechanical meters (PPM or VU). Two standard phasescope types are available, th e MSD600C or the R TW 10830. Other custom meter solutions may be possible.
Cable connections to the meters and phasescope will need to be run between the Centuri and the Console. Both balanced analogue and 110Ω digital cables may be necessary depending on configuration. These cables are not supplied by SSL.
The mechanical meters require two circuits of balanced analogue audio.
The MSD600C 5.1 phasescope has inputs for 6 digital signals (3 AES/EBU pairs), plus a serial diagnostic port. The RTW 10830 has eight digital input signals, eight digital output signals, eight analogue input sign als plus a remote control port. Note that two of the analogue input signals will also feed the mechanical meters.
The Analogue meters could be parallel feeds from the console main output signals or, alternatively, independent feeds from the analogue output card.
See Appendix C for pinouts of the Meter Inputs and Phase Scope connectors.
Page 45