Line 6 POD X3 Family manual Controls & Connections

Controls & Connections

2Select Knob – turning this knob will do different things depending on what page you’re on.

Select Knob Home Page – turn to select presets. See Chapter 4 for all the details.

Edit Page – turn to pick a different Model. This works for the Amp, Stomp, Mod, Delay, Reverb, and Wah edit pages. Full details are in Chapter 5.

You can also press this knob to store your own tweaked-up sounds in POD X3 Pro. Just

press, choose what to store and where to store it, and press the button again to complete 3•17 the Save. Chapter 4 will fill you in.

3Home / Hold for Commands – press to return to the Home Page. For User Presets, press repeatedly to toggle between the Tone Path Home Page and the Big User Home Page. Press and hold for 2 seconds to enter the Commands page. Full details are in Chapter 6.

4Inputs – press to enter the Inputs setup page to configure which inputs you’re using. Full details are in Chapter 6.

54-way Nav – pressing this will do different things depending on what page you’re

on.

Home Page – press Up, Down, Left, and Right to navigate to a processing block.

Edit Page – press Up and Down to move through each row of parameters available. You can also press Left and Right to move to the previous or next edit page.

6On/Off – press to turn the selected processing block on or off (the blocks are on when the buttons are lit and the block on the Home Page is solid). Double-press to enter the processing block’s Edit page, where you can fine-tune the parameters for that block. Press the Home button to leave the Edit page and return to the Home Page. Chapter 5 gives you details on all the Edit pages available.

7Outputs / Hold for System – press to enter the Outputs setup page, where you can set up POD X3 Pro for whatever you’re connecting it to. This is a very important step for getting the best sound out of your POD X3 Pro. Press and hold for 2 seconds to enter the System setup page. Full details are in Chapter 6.